Jump to content
  • 0
Sign in to follow this  
mitchell205

Concrete mix...soap or not

Question

Hello I'm new to the forum good stuff here .... Question I have is does anyone use dish soap in there concrete pre treat? ... I currently use 12.5% SH at a 30/70 mix with water... I have a new to me skid sprayer for roof and concrete... Just wondering if anyone has seen any difference using say dawn like I do in my house wash mix.. I live in Alabama so we always spray the SH/water before we use the surface cleaner ... Also do any of you spray SH after using surface cleaner and not rinse it off?.... Thanks

Share this post


Link to post
Share on other sites

8 answers to this question

Recommended Posts

  • 0

Yes I often use just a regular housewash mix on moldy mildewed concrete. Sometimes after I also spray and leave it . Especially if there are tannin stains in the concrete. Makes it look great. If there are rust stains or red dirt stains I may spray and leave oxalic acid.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Share this post


Link to post
Share on other sites
  • 0

I downstream using an 8gpm machine so I am told I should draw about 1 gallon soap for every 16 gallons water. I have never tested it but I believe I'm drawing a good bit stronger. Wheather I'm using 12.5% or just store bought bleach I still get good results filling a bucket half water and half bleach. Depending on what im washing I add two or three cups simple cherry or sodium metasilicate or tsp. If I'm using just household bleach I add a cup of caustic soda to help kick up the cleaning power. I can easily clean the nastiest houses with this mix.

Share this post


Link to post
Share on other sites
  • 0

Typically I only use tsp on painted siding when prepping for repaint. Too strong a mix can mess up glass im told but I've never had a problem. Tsp etches the paint microscopically to help the new paint hold better.

Share this post


Link to post
Share on other sites
  • 0

Pat, i mostly used the store bleach. The new clorox goes up to 8.5 percent sh. This caustic soda your using is safe on houses of all material? Where do you get it?

Share this post


Link to post
Share on other sites
  • 0

Caustic soda beads aka sodium hydroxide. It's used in making bleach. It is common at any chemical supplier. I get mine from Univar. Don't make it too strong it strips stain from decks and can strip paint in string solutions.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×