Surface Cleaner question

[Guest Sopowerclean]

I have a 30" steel eagle adjustable surface cleaner that i have acquired. I know nothing about how to adjust it or what tips need to be in it. i have been using a 16" hover model. any tips on how to use this new one would be appreciated.

3500 psi 5.6gpm Tuff super skid

Thank you

Lawrence Carter

Southern Power Clean

[Beth n Rod 1,279]

Which adjustments are you wanting to make?

Since we are distributors with steel eagle,

I will check with the mfr. about the tips for your unit.

Also, I will check to see if they have a pdf or something for literature.

Stay tuned :)

Rod~

[Pams Pressure & Clean 64]

If Rod is unable to find anything, the folks at Steel Eagle have a very good customer support system.

Give them a call & they can help answer any question you have.. Nice people..

[Guest Sopowerclean]

thank you Rod I would appreciate it. it has an adjustment lever on it and i know nothing about what it is for. also i would like advice on tip sizes fan pattern and how to adjust them with the bar.

Thank you

[Beth n Rod 1,279]

The adjustment level on the unit is to adjust the deck height from the ground.

Minimum height is 3/4 to 2 3/4 inches.

The rest I will check on this week. :)

Rod~

[Beth n Rod 1,279]

According to steel eagle, they come equiped #3 15* tips.

You can purchase them to come with #2-3.5 size tips and any degree pattern you need.

Hope this helps...

Rod~