beyoungsr 14 Report post Posted April 25, 2003 A cheap way to make this type of hose is to buy a 1 wire 3000 psi pressure washing hose. Take the hose to a hydraulics store and have them cut one end to length and add a fitting. They don't charge to crimp the fitting. I have been doing it here for approximately $3.50 including tax. You can do this twice before you have to buy a full pair of fittings. I can order a 50' 1 wire 3000 psi hose for $29.95 with fittings. That is .60 per foot + the additional fitting(s). Obviously if you run a higher psi you will need a differant type of hose. Works well for me! Share this post Link to post Share on other sites
