reed 500 Report post Posted August 22, 2005 I did a bid for a homeowner who had JOE PW'r do his deck. Needless to say, that's why they called me. Anyway, Joe PW'r used tarps and must have sprayed when sealing in that you can see the stain edges where the sealer went past the tarps. Stain is also noticeable on the fiberglass pool edges. Having not run into this before, will the fiberglass take spot stripping to remove the stain? I plan to use F18 max on a rag and go lightly over each area, but my concern is melting the fiberglass. Any comments on this would be most appreciated. reed Share this post Link to post Share on other sites
tunatussle 14 Report post Posted August 22, 2005 Go to a boating store and get some FSR to remove stains on fiberglass. I use it on boat hulls that have scum lines. Try a small area to see how it reacts with your "glas" Share this post Link to post Share on other sites
reed 500 Report post Posted August 23, 2005 Will do, plenty of the boat stores here. thanks, reed Share this post Link to post Share on other sites
Cleveland Mobile 14 Report post Posted August 23, 2005 had a similar situation here...if it hasnt been on long Krud Kutter will take it off. Andy Share this post Link to post Share on other sites
reed 500 Report post Posted August 24, 2005 It's been on for several months. reed Share this post Link to post Share on other sites
