Beth n Rod 1,279 Report post Posted September 1, 2005 08/31/05 19:44:41 Russell_C: Welcome to Wood-Chat! 08/31/05 19:44:55 Russell_C: We will be getting started in just a few mins. here 08/31/05 19:49:43 BethnRod Logs in [63.28.39.188] 08/31/05 19:49:57 BethnRod: Evening all 08/31/05 19:50:01 Russell_C: Hey Beth! 08/31/05 19:50:15 Russell_C: Just getting ready to get started here 08/31/05 19:51:24 BethnRod: Im sure Rod will pop in for a little while... 08/31/05 19:51:39 Russell_C: That would be great 08/31/05 19:52:56 Rod Logs in [63.28.39.188] 08/31/05 19:53:57 Russell_C: Hey Rod. . .gonna kick things off in a bit here 08/31/05 19:53:59 Rod: Hello, 08/31/05 19:54:15 Rod: good on ya mate' 08/31/05 19:54:49 Rod: I think it will be a good nite for all who come in to chat. 08/31/05 19:54:57 BethnRod: Brb - helping new users get signed on and such. 08/31/05 19:59:38 flimmy11 Logs Out 08/31/05 19:59:51 flimmy11 Logs in [68.162.184.65] 08/31/05 20:00:34 PressureProsInc Logs in [68.85.19.199] 08/31/05 20:00:43 PressureProsInc: hell all 08/31/05 20:00:47 PressureProsInc: hello 08/31/05 20:00:49 BethnRod: Hi Ken 08/31/05 20:00:53 Russell_C: Welcome to Wed Night Wood Chat 08/31/05 20:00:54 PressureProsInc: how are ya beth? 08/31/05 20:01:02 BethnRod: Good, you? 08/31/05 20:01:03 PressureProsInc: thanks Russ 08/31/05 20:01:09 PressureProsInc: not too bad at all 08/31/05 20:01:35 Russell_C: So far I know everyone here with the exception of Flimmy 08/31/05 20:01:50 PressureProsInc: how are you doing Flimmy? 08/31/05 20:02:02 Russell_C: Filly, my name is Russell Cissell. How are you this evening? 08/31/05 20:02:46 PressureProsInc: I can't believe the devastation down in the gulf.. I feel so bad for those people 08/31/05 20:03:02 Russell_C: Ken, it's horrible 08/31/05 20:03:20 BethnRod: Flimmy = Scott 08/31/05 20:03:27 flimmy11: I'm here 08/31/05 20:03:46 BethnRod: :) 08/31/05 20:03:57 PressureProsInc: We live in a great country. Anywhere else in the world and people would continue to suffer for months... hopefully relief wil come soon 08/31/05 20:04:35 Russell_C: I would like to give it a few more mins. here before we get started 08/31/05 20:05:00 PressureProsInc: good, I'm gonna take the chance for potty break..brb 08/31/05 20:05:04 Russell_C: While we wait for others to join does anyone have any general questions? 08/31/05 20:05:07 JimCrossleyy Logs in [66.32.248.190] 08/31/05 20:05:15 Russell_C: Welcome Jim 08/31/05 20:05:35 flimmy11 Disconnects 08/31/05 20:06:21 JimCrossleyy: Hi Russell, long time no chat. 08/31/05 20:06:34 Russell_C: Jim, how have you been? 08/31/05 20:07:10 PressureProsInc: Hi Jim 08/31/05 20:07:12 PressureProsInc: <-- Ken 08/31/05 20:08:01 JimCrossleyy: Keeping busy. I know what the agenda is tonight but when you get a chance, I have a mahogany question. Hi Ken. 08/31/05 20:08:10 flimmy11 Logs in [68.162.184.65] 08/31/05 20:08:31 Russell_C: Scott, have you got any questions about estimating? 08/31/05 20:09:58 Rod: Jim goes for the hard woods! 08/31/05 20:10:23 Rod: Exotic species? 08/31/05 20:10:29 flimmy11: Yes , how do you come up with an est. on how much stripper you will need. 08/31/05 20:11:05 Russell_C: Ok the first thing you need to do is calculate the square footage 08/31/05 20:11:17 flimmy11: I know it takes some exper. and alot depends on what your stripping 08/31/05 20:11:34 Russell_C: Right, for now we will keet it very simple. 08/31/05 20:11:44 Russell_C: Do you know how to determine area? 08/31/05 20:11:47 flimmy11: I did that pretty good on the last deck I did 08/31/05 20:12:15 flimmy11: I think Ido :D 08/31/05 20:12:16 JimCrossleyy: Russell it is about estimating. House with hardwood windows. some arched 25 ft. high. Lots of trim and removing varnish. $5M home, any words of wisdom on estimating. This requires scaffolding and the like. 08/31/05 20:13:22 flimmy11: I did the sq ft on the floors , that was easy , for the rails I did the length x 4 08/31/05 20:13:50 Russell_C: Jim-that is a great question! I would appreciat if you would save it until the end of the discussion. For now we are going to cover simple estimating. I will be happy to talk with you about that at the end of chat. 08/31/05 20:13:50 Low-PSI Logs in [24.254.240.235] 08/31/05 20:14:03 Rod: Jim, are you stripping chemically or sanding? 08/31/05 20:14:08 Low-PSI: Good evening all! 08/31/05 20:14:19 Rod: Hello 08/31/05 20:14:21 PressureProsInc: Hey Low, how are you? 08/31/05 20:14:31 Russell_C: To keep it simple if you measure the legnth of a deck and then multiply that by the width of the deck you will have it's surface area 08/31/05 20:14:32 Low-PSI: Much better, now 08/31/05 20:15:00 PressureProsInc: all setlled in for the night.. I apologize I have forgotten your first name since we last spoke, Low 08/31/05 20:15:30 PressureProsInc: Unless of course I am thinking of someone else 08/31/05 20:15:31 BethnRod: Low PSi - is this John Orr? 08/31/05 20:15:32 Low-PSI: I was not able to use my name (John Orr) when registering 08/31/05 20:15:42 Russell_C: We are discussing how measure area to determine square footage. 08/31/05 20:15:42 PressureProsInc: Okay I thought that was you, John 08/31/05 20:15:51 BethnRod: Hows that gravity situati9on going? 08/31/05 20:15:55 Rod: Hey John 08/31/05 20:15:55 Low-PSI: lol 08/31/05 20:16:05 Russell_C: There will be time for general discussion at the end of the this evenings chat. 08/31/05 20:16:12 BethnRod: sorry Russ. 08/31/05 20:16:25 Russell_C: No problem 08/31/05 20:17:02 Russell_C: To catch up, is there any one here who has questions about how to calculate square footage? 08/31/05 20:17:29 flimmy11: What about on a log house ? 08/31/05 20:17:41 Russell_C: Great question 08/31/05 20:18:00 Low-PSI: I measure the deck for the sq footage and add by the linear ft for the rails/spidles. 08/31/05 20:18:33 Russell_C: On a log house most often a contractor will measure the legnth of a wall and multiply that by the height. Then add 1/3 for the curve of the log. 08/31/05 20:19:01 Russell_C: For instance a 20 foot wall that is 8 foot high would be 160 08/31/05 20:19:27 PressureProsInc: wow a third for the curve? I didn't know that. I have yet to see a log house though 08/31/05 20:19:50 Russell_C: The 1/3 is not exact for square footage 08/31/05 20:20:08 Russell_C: it is to factor for the additional angles you have to hit 08/31/05 20:20:28 PressureProsInc: Would it be a fair way to err on the side of caution? Or could it actually cost you? 08/31/05 20:20:50 Russell_C: Rod, can you tell them the difference between cleaning flat cedar siding and a log profile? 08/31/05 20:21:25 Rod: sure, the basic difference is the angle of attack so to speak 08/31/05 20:21:34 flimmy11: I would guess you have to add for the log on the end also ? 08/31/05 20:21:41 BethnRod: yes 08/31/05 20:21:48 Rod: On a log, you have to deal with the upper angles as well as the bottom angles 08/31/05 20:22:07 Rod: Otherwise you will not get an even cleaning 08/31/05 20:22:10 JeffRobison Logs in [67.35.23.101] 08/31/05 20:22:27 PressureProsInc: I have to travel two hours to see any log homes, but I would like to be educated should the ned arise 08/31/05 20:22:30 PressureProsInc: Hi Jeff 08/31/05 20:23:08 Rod: On cedar siding, the main thing to concentrate on is the left to right angles of cleaning when you are working on rough cut cedar clap boards. 08/31/05 20:23:15 JeffRobison: Hello guys and girls. I am fairly new to doing any woodwork, so I am pretty much all ears. 08/31/05 20:23:28 Rod: Does that help? 08/31/05 20:23:36 Russell_C: As Rod said it is the additional time required by the angles that warrents the 1/3 addition 08/31/05 20:23:38 flimmy11: so could you measure the length and heigth of the end log and multiply by 2 ? 08/31/05 20:23:41 Russell_C: Excellent Rod! 08/31/05 20:24:11 Russell_C: Scott, you will pick those up when you measure that next side 08/31/05 20:24:32 PressureProsInc: I have a question re: cedar shake roofs 08/31/05 20:24:44 Russell_C: If they stick out 2 feet, add two feet to the legnth, the height will remain the same. 08/31/05 20:24:52 flimmy11: Ok I see now 08/31/05 20:25:00 Russell_C: Ken, go ahead 08/31/05 20:25:36 PressureProsInc: well obviously prices per aquare on wood resto vary but compare a per square foot rate for a deck versus a roof 08/31/05 20:26:00 Russell_C: Correct 08/31/05 20:26:08 Russell_C: everything is relative 08/31/05 20:26:19 PressureProsInc: percentage? 08/31/05 20:26:35 Russell_C: but no matter what, determinimg your total square footage is important 08/31/05 20:26:50 Russell_C: that is the only way to estimate your material cost 08/31/05 20:27:05 Russell_C: it is also the best way to estimat your labor time 08/31/05 20:27:27 Russell_C: only by knowing those two things can you make an educated bid 08/31/05 20:28:16 Russell_C: Some types of wood restoration pay a higher price per square foot 08/31/05 20:28:31 flimmy11: like ? 08/31/05 20:28:45 Russell_C: Some types of wood restoration you can complete faster 08/31/05 20:28:55 Russell_C: Scott, good question! 08/31/05 20:29:12 Russell_C: I think cedar homes pay best in St Louis 08/31/05 20:29:19 Russell_C: Rod, what do you think? 08/31/05 20:29:38 JeffRobison Logs in [68.223.50.141] 08/31/05 20:30:07 PressureProsInc: I agree knowing the square footage is paramount, but using a base of $1 per sf of wood at deck level could I expect to get two, three, four times that rate for a steeply pitched shake roof? 08/31/05 20:30:29 JeffRobison > Russell_C: Hello 08/31/05 20:30:48 Rod: Vertical wood restoration is considerably higher /sqft... 08/31/05 20:30:52 JeffRobison > Russell_C: Are you the maker of the Wood Tux Wet? 08/31/05 20:31:28 Rod: while deck restoration is becoming more competitive and in some cases not even worth bidding. 08/31/05 20:31:52 Russell_C: Ken, there is a lot to consider when bidding a roof 08/31/05 20:31:58 Russell_C: Will you use lifts? 08/31/05 20:32:08 Russell_C: Will you "walk" the roof 08/31/05 20:32:19 PressureProsInc: not in this scenario.. repelling 08/31/05 20:32:27 Rod: we find that the older more neglected wood restoration projects are not worth bidding because most h.o. wont pay the price to do it right. 08/31/05 20:32:36 PressureProsInc: agred Rod 08/31/05 20:32:57 Russell_C: The key to a roof estimate is in knowing not only the square footage, but also how you will attack it and most importantly, how long it will take. 08/31/05 20:33:12 Rod: Comparably, cedar homes are going for less around here than log homes. 08/31/05 20:33:25 Russell_C: If you will have to rent a lift, that is an additional job cost 08/31/05 20:33:42 Russell_C: I bid cedar for less than logs 08/31/05 20:33:56 PressureProsInc: This house is humongous, Russ. I honestly have no idea how long it wil take. I'd like to land the job but I don't want to give a ridiculous bid either 08/31/05 20:33:59 Russell_C: Foot fot Foot I try to add 1/3 for logs 08/31/05 20:34:36 Russell_C: Well Ken, gather as much information as you can 08/31/05 20:34:48 Russell_C: I am always happy to help you 08/31/05 20:35:08 Russell_C: A big job is no different than a small job 08/31/05 20:35:24 JeffRobison: Russell: Are you the maker of wood tux wet? 08/31/05 20:35:26 Rod: Project time is a difficult one to compute. 08/31/05 20:35:29 Russell_C: a big job is just a bunch of small jobs in one location 08/31/05 20:36:08 scottk Logs in [68.217.218.189] 08/31/05 20:36:09 flimmy11: how muhch faster can you do a house with a lift compared to a ladder ? Is it worth getting a lift ( less than $700 for a week) 08/31/05 20:36:10 Rod: thats a way to look at it 08/31/05 20:36:11 Russell_C: Jeff, I work for ESI yes, but I would be taking too much credit if I said I was the "maker". It's a team effort. 08/31/05 20:36:19 scottk: hey all 08/31/05 20:36:27 BethnRod: He's modest. 08/31/05 20:36:32 PressureProsInc: Hey Scott 08/31/05 20:36:35 Rod: lift is safer than a ladder and can be moved while you are in the bucket. 08/31/05 20:36:36 Russell_C: Flimmy that all depends on the size of the job 08/31/05 20:36:45 PressureProsInc: esi's products are awesome 08/31/05 20:37:00 flimmy11: 3000 sq ft log house 08/31/05 20:37:06 BethnRod: Ken - I agree! 08/31/05 20:37:13 flimmy11: 6000 sq ft of logs 08/31/05 20:37:15 JeffRobison: Would this be a good product for a beginner to start with? I have avoided decks becuase of the multiple trips to finish a job 08/31/05 20:37:23 Rod: 3000sqft, how many men on the job? 08/31/05 20:37:44 Rod: Jeff, yes. 08/31/05 20:37:46 BethnRod: We teethed on esi's products. Now we use them daily. 08/31/05 20:37:58 scottk: Jeff you should be able to handle wood from one weekend to the next weather permitting 08/31/05 20:38:04 Russell_C: If you are looking at a $7,000.00 home restoration and you can save two days with a lift then yes, get a lift. 08/31/05 20:38:07 PressureProsInc: Russ will give you more input, Jeff, but I find esi's products very easy to use. Also, Jeff, beth or me or anyone on TGS that is familiar would be happy to help you 08/31/05 20:38:10 flimmy11: 2 maybe 3 08/31/05 20:38:42 Rod: 2-3 guns on the job? 08/31/05 20:38:51 flimmy11: 2 08/31/05 20:39:19 Rod: then you could be looking at 1 1/2 days to wash and 2-2 1/2 days to seal. 08/31/05 20:39:24 Russell_C: How much of the job would you use the lift on? 08/31/05 20:39:31 JeffRobison: I read TGS religiously and try to gather as much information as I can, but need some "hands on experience" I have messed around with my deck, but afraid to do someone else's right now. 08/31/05 20:39:33 flimmy11: 1 gun on the lift 1 on the ground doing low stuff. Yard is all level 08/31/05 20:39:35 BethnRod: Is this the one you posted pics of with the test spot in the Gallery? 08/31/05 20:39:42 Rod: The 2nd story levels and up 08/31/05 20:40:04 flimmy11: yes 08/31/05 20:40:08 BethnRod: Jeff - you can come get hands on with us if you like. We are in Maryland 08/31/05 20:40:08 Rod: Is there a well close by,,, 08/31/05 20:40:28 flimmy11: city water:D 08/31/05 20:40:39 scottk: We have never used the esi products,but with the rpc stuff we had great results by just following the directions 08/31/05 20:40:54 JeffRobison: Hopefully tagging along with Cujo one of these days. Also SunBrite is 5 miles from my house. I have had no time to take a class yet 08/31/05 20:41:05 Rod: ok, the only other issue could be ruts from the wheels, you may want to price having them filled in if this is the case. 08/31/05 20:41:09 scottk: I think Russell give the same kind of customer support for teh esi products 08/31/05 20:41:16 PressureProsInc: flimmy(scott), where is Scottdale? 08/31/05 20:41:35 BethnRod: esi's products are easy to use. 08/31/05 20:41:39 flimmy11: the guy ownes an excavation company 08/31/05 20:41:58 flimmy11: 30 min south of pittsburgh 08/31/05 20:42:07 Rod: ah ha! so he knows the potential for this? 08/31/05 20:42:43 Rod: I'll sit back and let Russ continue the chat... 08/31/05 20:42:52 BethnRod: We have traveled to p'burg for logs before. 08/31/05 20:43:00 flimmy11: yes and I told him I would be using a lift , just in case I did 08/31/05 20:43:11 Russell_C: Well, we are talking about estimating a large project. Lets continue with that 08/31/05 20:43:38 Russell_C: Scott, what else can you tell us about the job? 08/31/05 20:44:27 flimmy11: Ok , it has sw deck scapes on it , it'sa 1 yr old house 08/31/05 20:44:58 Russell_C: do you have a total square footage? 08/31/05 20:45:00 flimmy11: The builder contacted me for a bid because the home owner is holding back$$ 08/31/05 20:45:16 flimmy11: 6000 sq ft of log 08/31/05 20:45:18 Rod: Big Flag 08/31/05 20:45:25 Russell_C: Right! 08/31/05 20:45:29 flimmy11: I know 08/31/05 20:45:37 Russell_C: but that is for another discussion! 08/31/05 20:45:47 Russell_C: lets work with estimating 08/31/05 20:45:53 flimmy11: I gave them a bid requireing 1/3 up front 08/31/05 20:46:06 Russell_C: ok obviously you are going to have to strip the house 08/31/05 20:46:13 flimmy11: yes 08/31/05 20:46:41 Russell_C: Do you have a stripper of choice or shall we use HD-80 for the purpose of the estimate? 08/31/05 20:46:44 flimmy11: I tried some other stuff to srtip and it came off easy 08/31/05 20:47:20 Russell_C: It is easiest for me to speak about ESI products, but if you tell me the cost I can work with anything 08/31/05 20:48:03 flimmy11: HD-80 is good, I used F-18 MAX for a test spot but have heard the HD-80 is just as good or better 08/31/05 20:48:10 Russell_C: ok, lets assume you are using HD-80 08/31/05 20:48:20 Russell_C: The cost is 2 cents per square foot 08/31/05 20:48:33 GregRentschler Logs in [24.12.32.183] 08/31/05 20:48:36 Russell_C: so your stripper will cost $120.00 for the job 08/31/05 20:48:47 Russell_C > GregRentschler: Welcome 08/31/05 20:48:51 GregRentschler > Russell_C: howdy russ 08/31/05 20:49:01 BethnRod: Hi Greg! 08/31/05 20:49:13 Russell_C: Add 15% for overage and you've got $148.00 08/31/05 20:49:18 GregRentschler: Hey Beth! I chimed in at just the right time :) 08/31/05 20:49:40 PressureProsInc: Hi Greg 08/31/05 20:49:42 flimmy11: Ok how much of the 80 are you going to use ? 08/31/05 20:49:53 Russell_C: Neutralizer is going to be 1.5 cents per square foot for $90.00 08/31/05 20:50:16 Russell_C: 30 to 40 gallons 08/31/05 20:50:24 flimmy11: I think the 80 could be at 3 oz per gal 08/31/05 20:50:35 scottk Logs Out 08/31/05 20:50:36 Russell_C: same on the Neutralizer 08/31/05 20:50:47 Russell_C: I always estimat full stregnth 08/31/05 20:51:04 flimmy11: is that 4-8 per gal? 08/31/05 20:51:12 Russell_C: "better to over estimate than under bid" 08/31/05 20:51:51 GregRentschler: Hey Ken! Sorry -- phone rang 08/31/05 20:51:53 BethnRod: Agreed. If you estimate based on full strength and use less, you are ahead dollar wise. 08/31/05 20:51:57 Russell_C: I am figuring at 8 oz per gallon 08/31/05 20:52:11 Russell_C: (about 2/3 cup) 08/31/05 20:53:00 Russell_C: ok so add 15% to the neutralizer and we have about $105.00 08/31/05 20:53:13 Russell_C: Now, are you going to stain this job? 08/31/05 20:53:20 JeffRobison: Can I ask some elementary questions that some may answer in between this intelligent conversation? I do not want to be a pain while the pros talk 08/31/05 20:53:23 flimmy11: yes 08/31/05 20:53:23 PressureProsInc: No problem, how are you, Greg.. Russ is schoolin' us on large project estimates 08/31/05 20:53:52 flimmy11: I'm no pro :D 08/31/05 20:54:02 Russell_C: Ok, in a sec we will calculate for stain 08/31/05 20:54:18 flimmy11: great 08/31/05 20:54:24 GregRentschler: Doing well... started missing the wood care :) 08/31/05 20:54:39 PressureProsInc: Jeff, you may IM me if you wish, I will help you all that I can 08/31/05 20:54:47 PressureProsInc: Greg, it is a labor of love 08/31/05 20:54:53 Russell_C: [ can we please keep cross chat in private messages. There will be a block of time at the beginning and end of Wood Chat for general discussion ] 08/31/05 20:55:39 flimmy11: so we have $260 for chems 08/31/05 20:55:53 Russell_C: more or less! 08/31/05 20:56:02 Russell_C: ok now what stain are you going to apply? 08/31/05 20:56:45 JeffRobison Logs in [68.223.50.141] 08/31/05 20:56:49 flimmy11: Don't know yet, haven't got the job 08/31/05 20:57:15 Russell_C: Well lets assume you are bidding it and you want to use Wood-Tux Wet 08/31/05 20:57:34 JeffRobison: My computer cut off, I am back with my silly questions, if you all don't mind 08/31/05 20:57:41 Russell_C: You will need about 30 - 35 gallons 08/31/05 20:57:45 flimmy11: ok , the logs are smooth 08/31/05 20:57:48 Rod: 150sqft/gal after overspray and drift is our figure. 08/31/05 20:58:17 Rod: jeff, pm your questions if you like 08/31/05 20:58:17 Russell_C: Well Rod that will be our 35 number 08/31/05 20:58:36 Rod: then I would price it for 40. 08/31/05 20:58:48 Russell_C: that is $973.00 for the stain 08/31/05 20:58:55 Rod: Beth always makes me add a 5'er...:) 08/31/05 20:59:19 Russell_C: ok to be safe $1,112.00 for the stain 08/31/05 20:59:32 flimmy11: cool , I figured $2000 in chems and stain 08/31/05 20:59:53 Russell_C: So that is roughly $1,372.00 for materials 08/31/05 20:59:53 BethnRod: Better to add an extra 5'er, in case you spill one...or something.... 08/31/05 21:00:10 flimmy11: but I also figured fuel in that and you see how thats going up 08/31/05 21:00:13 Russell_C: ok Scott, great job 08/31/05 21:00:20 Russell_C: so far you have not under bid! 08/31/05 21:00:21 JimCrossleyy: Good for Beth, I always have to go back for an extra 5er. 08/31/05 21:00:53 Rod: lol really 08/31/05 21:01:10 Russell_C: Now that you know your material cost you can look at labor 08/31/05 21:01:15 Rod: Hey russ, what about ladder changes? 08/31/05 21:01:31 JimCrossleyy: I am listening 08/31/05 21:01:32 Russell_C: (there is a world of other materials we are leaving out but I am trying to keep it simple) 08/31/05 21:02:01 Russell_C: Rod, that is an excellent labor question 08/31/05 21:02:39 flimmy11: I know , thats why I add some exta in but not as much as we have figured in here 08/31/05 21:02:44 Russell_C: Looking at Scott's 6000 square foot log home. . .how long did you think it would take? 08/31/05 21:02:59 Russell_C: What are your set ups? 08/31/05 21:03:08 Russell_C: will you use ladders or lifts? 08/31/05 21:03:18 Russell_C: Lets start with the ground work 08/31/05 21:03:19 flimmy11: I guessed 5 days because of lack of experiance 08/31/05 21:03:41 Russell_C: Lets talk about how to estimate and bid so we don't have to guess any more! 08/31/05 21:03:45 flimmy11: lifts for all the upper stuff 08/31/05 21:04:01 Russell_C: Great, for the ground work, how many hours do you think? 08/31/05 21:04:22 flimmy11: 2 guys 1 day 08/31/05 21:04:29 flimmy11: 8-10 08/31/05 21:04:30 Russell_C: 8 hrs each? 08/31/05 21:04:44 Russell_C: ok, lets say 20 hours 08/31/05 21:04:46 flimmy11: taking our time 08/31/05 21:04:58 Russell_C: is that to strip or to strip and seal? 08/31/05 21:05:38 flimmy11: srtip 08/31/05 21:06:13 Russell_C: Rod. . .time wise. . .if you are 10 hours on a strip how long on a seal? 08/31/05 21:06:42 Rod: 1.5 times the strip time because of prep and masking. 08/31/05 21:06:59 BethnRod: yeah windows and masking and plant can slow you down. 08/31/05 21:07:06 Russell_C: So 30 hours for the seal 08/31/05 21:07:11 Russell_C: (I agree) 08/31/05 21:07:27 Russell_C: Now Scott how long on the lift work? 08/31/05 21:08:01 flimmy11: half that time 08/31/05 21:08:17 flimmy11: maybe a little longer 08/31/05 21:08:26 Russell_C: so that will be another 25 to 30 hours 08/31/05 21:08:39 Russell_C: Lest say 80 hours total 08/31/05 21:08:47 flimmy11: ok 08/31/05 21:08:50 Russell_C: Now again you want to add a buffer of 15% 08/31/05 21:09:03 flimmy11: 92 hrs 08/31/05 21:09:11 Russell_C: that will put you at 92 hours 08/31/05 21:09:21 Russell_C: Now we have two KEY numbers 08/31/05 21:09:33 Russell_C: 92 hours and $1375 in material cost 08/31/05 21:09:55 Russell_C: At this point you decide how you want to bid this job 08/31/05 21:10:11 Russell_C: Bidding is the topic for Next Weeks Wood Chat 08/31/05 21:10:34 Russell_C: I will keep the notes from this weeks discussion to carry over. 08/31/05 21:10:37 flimmy11: lol we have to wait lol 08/31/05 21:10:43 Russell_C: Not at all 08/31/05 21:10:53 Russell_C: that is just the end of the structured Wood Chat 08/31/05 21:10:57 flimmy11: I'm just jokeing 08/31/05 21:11:11 Russell_C: Now you can feel free to throw out anything you want. 08/31/05 21:11:40 Russell_C: I will keep working off Scotts example house next week though! 08/31/05 21:12:12 Russell_C: And for being a great sport about it, Scott if you want to send me your address inh and e-mail I will send you 5 free gallons of HD-80 08/31/05 21:12:28 flimmy11: on the 80 how much sq ft do you est. per gal ? 08/31/05 21:12:32 Russell_C: My e-mail is Imrcc1@aol.com 08/31/05 21:12:36 BethnRod: The transcript from this session will be posted in the library in a few days. 08/31/05 21:12:37 Russell_C: 150 08/31/05 21:13:04 Russell_C: 150/sq foot when calculating cleaner, stripper or stain 08/31/05 21:13:38 Low-PSI: Did someone mention ladders? 08/31/05 21:13:46 Low-PSI: lol 08/31/05 21:13:46 PressureProsInc: I find it to be less if you use the chemical to keep it wet. 08/31/05 21:13:51 Russell_C: If anyone would like a free sample of Wood-Tux wet, shoot me your address and I will send out a pint. It is plenty to make up about 20 sample boards! 08/31/05 21:14:12 tropicalwave Logs in [24.13.142.208] 08/31/05 21:14:15 Russell_C: Do you have a ladder question? 08/31/05 21:14:19 PressureProsInc: Russ, any word on field tint for the WT 08/31/05 21:14:28 PressureProsInc: Yo Mike 08/31/05 21:14:31 flimmy11: Thanks Russell 08/31/05 21:14:42 Russell_C: Ken, available now 08/31/05 21:14:50 flimmy11 Logs Out 08/31/05 21:14:52 Russell_C: will begin shipping next week 08/31/05 21:15:01 tropicalwave: whas up 08/31/05 21:15:01 PressureProsInc: awesome 08/31/05 21:15:08 flimmy11 Logs in [68.162.184.65] 08/31/05 21:16:06 PressureProsInc: How is the wood resto market in Chicago, Mike 08/31/05 21:17:24 tropicalwave: been ok so far.....been on and off, busy with the reg gig at the moment 08/31/05 21:17:36 PressureProsInc: I understand 08/31/05 21:18:03 tropicalwave: waiting to see if we're getting sent to LA 08/31/05 21:18:27 flimmy11: do you work off the ladder when stripping or try to do as much as you can from the ground and insp. from the ladder before staining 08/31/05 21:18:29 PressureProsInc: for real? 08/31/05 21:18:39 Low-PSI: Any idea on how long WTW will last? 08/31/05 21:18:52 Russell_C: 3 years 08/31/05 21:19:09 tropicalwave: yup...my swat team has been going all week, training and rehearsing 08/31/05 21:19:12 Russell_C: Flimmy I think we would all prefer to stay on the ground if we could! 08/31/05 21:19:26 Low-PSI: I know I would! 08/31/05 21:19:30 Low-PSI: lol 08/31/05 21:19:41 Low-PSI: sorry 08/31/05 21:19:48 GregRentschler: Good luck down there if ya go... it's a wreck! 08/31/05 21:20:05 Low-PSI: How wet can PT wood be with wtw? 08/31/05 21:20:16 flimmy11: like using an ext wand for the high stuff 08/31/05 21:20:18 tropicalwave: oh yea....watching it on fox now....its gonna get uglier too 08/31/05 21:20:43 GregRentschler: I was all geared up to vacation there next week. Bummer...... 08/31/05 21:20:55 Russell_C: No real limit as long as there is no water on the surface 08/31/05 21:21:05 tropicalwave: well, thats better than going last week 08/31/05 21:21:13 Low-PSI: You mean standing water? 08/31/05 21:21:18 Russell_C: yes 08/31/05 21:21:20 GregRentschler: :o so true! 08/31/05 21:21:44 Russell_C: Flimmy, I have seen some who use extension wands, I prefer to stay close to the work. 08/31/05 21:22:16 flimmy11: no , I have 2 and have not used them. They came with the rig I bought 08/31/05 21:22:35 Low-PSI: Russ, to explain my ladder comment, I fell off of one 2 months ago. 08/31/05 21:22:39 Russell_C: They are great for other types of work 08/31/05 21:22:50 Russell_C: Ouch 08/31/05 21:22:59 flimmy11: well I did use one , I taped a brush to it to do some gutters 08/31/05 21:23:01 Russell_C: I bet you do want to say on the ground! 08/31/05 21:23:21 tropicalwave: russell, are the colors extra money or is the price listed, what it is for the different colors 08/31/05 21:23:52 tropicalwave: im so darn tired that probably made no sense 08/31/05 21:23:53 Low-PSI: Yup, broken radius - right wrist, torn right rotator cuff and a major internal wound in my right leg. 08/31/05 21:24:05 Russell_C: well the tint kits are extra 08/31/05 21:24:29 Low-PSI: 2 operations 08/31/05 21:24:29 Russell_C: each color is $19.95 (list) 08/31/05 21:24:36 PressureProsInc: Goodnight all, thanks for the excellent info.....I'll be back next wek 08/31/05 21:24:47 Russell_C: I think the kit with both colors is $29.95 08/31/05 21:24:51 PressureProsInc Logs Out 08/31/05 21:24:52 Low-PSI: G'night 08/31/05 21:24:55 Russell_C: Good night Ken 08/31/05 21:25:05 Russell_C: The black will last you forever 08/31/05 21:25:30 Russell_C: The red will tint up to 40 gallons 08/31/05 21:25:40 Rod: Russ, are you still selling the clear? 08/31/05 21:25:45 Russell_C: just depends on the color you are going for 08/31/05 21:25:49 GregRentschler Logs Out 08/31/05 21:25:53 Russell_C: not this year 08/31/05 21:25:55 BethnRod Logs Out 08/31/05 21:26:30 tropicalwave: how much sealer does 19 bucks tint? 5 gal? 08/31/05 21:26:36 Russell_C: if you need a redwood I can special blend some at no extra charge but it will take about a week 08/31/05 21:26:51 Russell_C: up to 40 gallons for red 08/31/05 21:27:00 Russell_C: like 1200 for black 08/31/05 21:27:13 Russell_C: the black goes a long long long way 08/31/05 21:27:36 tropicalwave: my people seem to like cedar and a light brown up here 08/31/05 21:27:49 Russell_C: then you want the base color 08/31/05 21:27:57 Russell_C: warm honey gold 08/31/05 21:28:07 Rod: Warm honey gold and Western Cedar in our area... 08/31/05 21:28:09 tropicalwave: i dont even know what tints you all have 08/31/05 21:28:19 Russell_C: if you want to make it pop add a touch of red 08/31/05 21:28:29 Russell_C: Just Red and Black that is all you need 08/31/05 21:28:48 Rod: Kick it up a notch! 08/31/05 21:29:02 Russell_C: with red and black you can make from gold to cinimon to brown to rust to red cedar 08/31/05 21:29:03 flimmy11: my wife wants a very light color for our deck , what color would you sugest ? 08/31/05 21:29:15 Russell_C: Warm Honey Gold 08/31/05 21:29:24 tropicalwave: ok, so i would imagine theres some directions with this stuff..LOL 08/31/05 21:29:45 Russell_C: Sure, remove lid and add to taste! 08/31/05 21:29:58 Russell_C: be sure to mix while adding 08/31/05 21:30:07 Low-PSI: Is the Warm Honey Gold similar to Olympic Max Honey Gold? 08/31/05 21:30:14 tropicalwave: what it looks like in the pail isnt what it looks like on the wood 08/31/05 21:30:17 Low-PSI: In color, of course 08/31/05 21:30:43 Russell_C: no it is not wysiwyg 08/31/05 21:31:04 Russell_C: it will depend on the color of the wood 08/31/05 21:31:07 Rod: Time to hit the hay, g'nite all, c-ya next time... 08/31/05 21:31:13 Russell_C: this is a transparent pigment system 08/31/05 21:31:18 Low-PSI: nite 08/31/05 21:31:20 Russell_C: Night Rod 08/31/05 21:31:25 Russell_C: Thanks for joining 08/31/05 21:31:59 Russell_C: This type of stain is nothing like paint 08/31/05 21:32:19 Russell_C: it allows light to pass through and then bounce back out 08/31/05 21:32:22 flimmy11: what is he best way to apply it 08/31/05 21:32:33 Russell_C: Paint just bounces the light right back at you 08/31/05 21:32:41 Russell_C: I like to spray for speed 08/31/05 21:32:49 Russell_C: any method works well though 08/31/05 21:34:02 JeffRobison Logs Out 08/31/05 21:34:09 Low-PSI: Russ, I use Oly Max Honey Gold almost exclusively, an dhave for 3 years, I and my customers love it - but it drives me crazy trying to schedule the staining, so WTW is very appealing. Is your Warm Honey Gold similar? 08/31/05 21:34:40 Russell_C: Yes it is in that light family 08/31/05 21:34:49 Low-PSI: Hmm... 08/31/05 21:34:51 Russell_C: I am happy to send you a sample 08/31/05 21:35:02 Low-PSI: That would be great! 08/31/05 21:35:07 Russell_C: you will definately see the quality difference right in the can 08/31/05 21:35:20 Russell_C: send me an e-mail with your address 08/31/05 21:35:27 Low-PSI: I will 08/31/05 21:35:41 tropicalwave: how do I get that promotional good will? LOL 08/31/05 21:35:44 flimmy11: whats your email ? 08/31/05 21:35:50 Russell_C: imrcc1@aol.com 08/31/05 21:36:01 Russell_C: just need an e-mail with an address 08/31/05 21:36:16 Russell_C: I have free samples of Wood-Tux for everyone 08/31/05 21:36:16 Low-PSI Logs Out 08/31/05 21:36:52 tropicalwave: ok, I have your email in our business directory....looking forward to it 08/31/05 21:37:17 low-psi Logs in [24.254.240.235] 08/31/05 21:37:27 Russell_C: Well, thank you for comming tonight 08/31/05 21:37:35 low-psi: TY 08/31/05 21:37:46 JimCrossleyy: Russel, I will catch up with you either tomorrow or on Friday re: the windows. I need to rebuild a Teckpump tonight for a gig tomorrow. 08/31/05 21:37:51 JimCrossleyy: Nite all. 08/31/05 21:37:54 Russell_C: I hope to get a more structured format going here 08/31/05 21:37:59 Russell_C: Great Jim 08/31/05 21:38:02 Russell_C: give me a call 08/31/05 21:38:11 Russell_C: Night 08/31/05 21:38:32 low-psi: nite 08/31/05 21:38:34 tropicalwave Logs Out 08/31/05 21:38:35 JimCrossleyy Logs Out 08/31/05 21:38:42 Russell_C: Thank you all for taking the time to join us this evening 08/31/05 21:38:49 low-psi Logs Out 08/31/05 21:38:51 Russell_C: I think I am headding out as well 08/31/05 21:39:05 flimmy11: Russell I think it was good after it got going thanks 08/31/05 21:39:19 flimmy11: Godd night everyone 08/31/05 21:39:27 Russell_C: No problem, they will just keep getting better! 08/31/05 21:39:35 flimmy11 Logs Out 08/31/05 21:39:36 Russell_C: Come back next week! 08/31/05 21:40:48 Russell_C Logs Out 08/31/05 21:41:06 Rod Disconnects Share this post Link to post Share on other sites