Aplus 525 Report post Posted June 8, 2003 Concrete was scorched by a propane grill burner that ruptured. A fireball erupted, and melted the supply line from the tank. Flames were all over, apparently shooting out over 15 feet. Has anyone ever cleaned concrete that has been scorched? What chems should I use? Share this post Link to post Share on other sites
0 ron p 500 Report post Posted June 8, 2003 acid etch it muratic Share this post Link to post Share on other sites
0 timhays 14 Report post Posted June 9, 2003 if acid doesnt work,try a sandblaster attachment. Share this post Link to post Share on other sites
0 One Tough Pressure 580 Report post Posted June 9, 2003 This may be worth looking into. http://www.prosoco.com/Product.asp?ID=113 Share this post Link to post Share on other sites
0 Aplus 525 Report post Posted June 9, 2003 The customer has decided to have the concrete replaced. There was heavy spalling on the concrete, apparently from the intense heat. I'll be cleaning the ribbon around the pool to try blend it in with the new concrete. Sometime later this season. Thanks for the suggestions. Share this post Link to post Share on other sites
0 ron p 500 Report post Posted June 9, 2003 A-PLUS if you want the job then check this out www.wonderpaint.com click the pic of the cement. Share this post Link to post Share on other sites
0 Aplus 525 Report post Posted June 10, 2003 Ron, That is interesting. Thanks for posting the link. I think that would be a good solution for use in your shop and garage. Perhaps not the best choice for around the pool area. Share this post Link to post Share on other sites
0 One Tough Pressure 580 Report post Posted June 10, 2003 How about this one? It can be broom, brush or squeegee applied to provide different finishes. You can add color to it also. http://www.quikrete.com/diy/potm.html Share this post Link to post Share on other sites
Concrete was scorched by a propane grill burner that ruptured. A fireball erupted, and melted the supply line from the tank. Flames were all over, apparently shooting out over 15 feet.
Has anyone ever cleaned concrete that has been scorched?
What chems should I use?
Share this post
Link to post
Share on other sites