Jump to content
Sign in to follow this  
steffysmom

Dr-60

Recommended Posts

Hi Everybody---getting ready to clean some very heavily soiled drive-thru's--I've been hearing some great things about the DR-60. Would appreciate any input that any of you guys have. If you currently use something else, I would appreciate hearing about the concrete cleaning chemicals that you use.

Jeff

Share this post


Link to post
Share on other sites

The main reason that we posted this message was because we wanted to make sure that DR-60 works well on concrete. We don't mind spending the $99 for 5 gallons to clean concrete since we want to make our customers properties "stand out" however, it is $58 to ship the product from Texas to PA--gets pretty costly per sq. ft. when you start adding in the shipping costs. We found the company that the product was made for in Richmond Virginia--I'm sure that it would be a lot less to ship from VA to PA--going to call them tomorrow to see what the shipping costs will be. Appreciate everyone's input.

Share this post


Link to post
Share on other sites

Most concrete cleaners are shipped as haz mat, which ups the shipping charge alot. I buy RPC 2000 in 55 gal. kit, the shipping charges are still there, but not as much.

DR-60 ? Is that made by Dominion Restoration?

Share this post


Link to post
Share on other sites

IMHO, DR-60 is a fine cleaner, but the price is ridiculous, the shipping is worse and to get good results, you have to use too much. Dr-60 is not a very good degreaser, but it does brighten the concrete. So...I use a good, inexpensive degreaser for drives-thrus and follow with a dose of oxalic acid to brighten.

Share this post


Link to post
Share on other sites

I agree with John. DR-60 is excellent but at $32 per gallon with shipping you will have to charge almost $.20 per s.f just for chemicals. With other fixed expenses and the small amount of concrete on drivethrus I would have to come in at around $.30 per s/f. Even if you go $.25 per s.f you are still 250% higher than the going rate for commercial flatwork up here. In York the rate is probably even cheaper than $.10 per s.f. on average.

You can always offer it to homeowners as a premium service to set you apart but I would reconsider stocking it for everyday use.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×