dgold42 14 Report post Posted March 30, 2006 Does anyone connect the shurflo pump directly to there PWer battery? Is this going to be to much draw from the battery? I just purchased a shurflo setup, first one, to do roofs and am curious if this setup will hurt the battery. I would think everytime I run my PWer it would recharge the battery. I was planning on replacing the battery that came with the PWer with a 12v deep cycle marine battery. I did a search and couldn't find any info on the pro's running a shurflo this way. That in itself put up a red flag lol. My problem is sometimes I don't have access to an outlet to recharge the battery. My girlfriend lives on top of a 14 floor highrise about an hour away from my office and I really don't want to lug the battery up there to recharge. Any help would be appreciated. Thanks Dan Share this post Link to post Share on other sites
R. Williamson 14 Report post Posted March 30, 2006 What is the amp output of your engine? What is the amp draw of the Shurflo? What size amp battery does your pressure washer have? Is this a hot water washer? If yes is the burner 12 volt or 115 volt? Share this post Link to post Share on other sites
