bforbis 14 Report post Posted June 3, 2006 My machine is the same size and I run a 24" and 36" max, both are two nozzle design and do fine. Both my machines have, and I prefer to be on swivels so I can go from side to side and any direction. The BG looks to be a bit limited in movement, but I have not used that model. My first one was a hover type design (borrowed) and it felt like resistant to move, but moved OK. Still prefer swivel casters Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted June 4, 2006 I use the 24" Steel Eagle and you can have the same lateral movement of a hover or castered unit, simply by lifting the back end a little bit and allowing the unit to move on the front caster. Should be no different for the Big Guy. Share this post Link to post Share on other sites
