hot water burners

[David O'Connell Jr. 14]

We are looking into Hot Water.

We have all cold water equipment now. I am looking into a burner only, what or who makes a burner with the least amount of problems?

[Don Phelps 85]

In my opinion that's somewhat of a loaded question. Once you get into hot it's going to become somewhat more problematic than cold no matter what. Pressure switchs, flow switchs, high limit switchs, igniters etc. are the usual culprits.

Below is a link to some of the hot boxes we sell, but I personally don't think they're any more (or less) trouble than others.

http://www.allpressurewashers.com/images/homepages/ap6.jpg

[David O'Connell Jr. 14]

trying to not sound too much a fool, I see there are LP or 12 volt or 115 volt diesel.

Is there a better of the bunch? Can I use only LP and thats it?

[Don Phelps 85]

To my knowledge you can use either LP or 12 volt. 115 would require a generator. As far as 'better' most seem to prefer 12 volt, but there are some propane burners out there too.