derekcaldwell 14 Report post Posted March 10, 2007 Can anyone tell me how to interpret the nozzle chart that is in the provided image? And once I understand the chart is it correct that I divide by 2 for my surface cleaner? Thank you, Derek Caldwell Share this post Link to post Share on other sites
0 racechaser 64 Report post Posted March 10, 2007 Can anyone tell me how to interpret the nozzle chart that is in the provided image? And once I understand the chart is it correct that I divide by 2 for my surface cleaner?Thank you, Derek Caldwell That's not an easy chart to read. But if you know your desired PSI and what GPM's your machine puts out, then go to the pressure column and continue down till you see your GPM.The slide left to see what nozzle size you need. If you post desired psi and your gpm's we'll give you an exact size. Scott Share this post Link to post Share on other sites
0 racechaser 64 Report post Posted March 10, 2007 Chart didn't format right Share this post Link to post Share on other sites
0 Mike W 14 Report post Posted March 10, 2007 First divide the GPM of your machine by 2. Then find that number on the chart that corresponds with the PSI of the machine. This will give you the correct orifice size. ie: If your machine is setup to run 4@4000, you would normally run a 4.0. If you need 2 nozzles for your surface cleaner, you would need two 2.0. The chart I use I got from dultmier web site. Hope this helps Share this post Link to post Share on other sites
0 Mike W 14 Report post Posted March 10, 2007 It took some digging, but here is the chart I use. C_Nozzle.pdf Share this post Link to post Share on other sites
0 FCPWLLC 233 Report post Posted March 10, 2007 Here is a calculator for nozzle size. I will calculate any of the three if you leave one blank. BARENS INC. Pressure Washer Parts and Accessories - Nozzle Calculator And here is a very good Nozzle chart... http://pressurewashingusa.com/nozzlecharts.pdf Share this post Link to post Share on other sites
0 John Orr 206 Report post Posted March 10, 2007 The absolute best nozzle chart I have ever seen. Very easy to figure out. Share this post Link to post Share on other sites
0 racechaser 64 Report post Posted March 10, 2007 The absolute best nozzle chart I have ever seen. Very easy to figure out. I tried posting Steve's too and couldn't get it to format when I posted. Thanks John, I too find that chart so easy to use too. Scott Share this post Link to post Share on other sites
0 PWkid 79 Report post Posted March 10, 2007 Here is an automatic one that I use. The Pressure Washer Store - Machines, Parts, Accessories, Supplies Share this post Link to post Share on other sites
Can anyone tell me how to interpret the nozzle chart that is in the provided image? And once I understand the chart is it correct that I divide by 2 for my surface cleaner?
Thank you,
Derek Caldwell
Share this post
Link to post
Share on other sites