Leaderboard

Graco recently released a new line of Fine Finish Low Pressure Tips, which allow you to spray at about half the pressure as the old Fine Finish Tips. I thought this might be useful info for those who've stayed away from using an airless to apply stains & sealers due to excess overspray, as well as for those airless users looking for an improvement. I've used their old fine finish tips for years to apply stain, and I'd agree that even with a small tip and the pressure turned up just enough to create a good spray pattern, that overspray was often an issue. Since it's been steady rain here in Portland, OR for most of the spring so far, I've only done 2 stain jobs, but on both occasions I've had the chance to use the new Fine Finish Low Pressure Tips, and the difference is amazing. I'd definitely look into them if you're using an airless. Here's a link for those interested. Graco Fine Finish Low Pressure Tips

Graco 395 or Titan 440 is pretty standard. I've been a painting contractor for 28 years so I have quite a few smaller pumps. They also sell a Graco 390 and Titan 400, both of which are good little pumps, and cost a little less than the 395/440 respectively. .

Rod thank you for quick reply. I was leaning towards a Titan 440i I heard a lot of good reviews on these machines. Thank you.