splashandash
-
Content count
140 -
Joined
-
Last visited
Posts posted by splashandash
-
-
Im good with what ever everyone picks.
-
I would be up for that when and where.
-
Don i did a roof in isleworth last year for a developer that was over 20,000 square foot,and it was the small house on the block. if you have ever been on the butler chain and looked at some of the houses you get a new perspective for filthy rich.
-
its a old 2021
-
Izusu turbo diesel 14 ft flatbed 8 gpm hot 5.6 gpm hot 550 gallons of water couple of hose reels couple 12 volt chem pumps 50 gallon under bed chem tank. couple surface cleaners. for what i do i dont think i could be set up any better.
-
It sounds like the pressure switch stuck or went bad.
-
John i would rather have aluminum but i got steel because the price was right.
-
check your ground i just had a kohler that wouldn't start sometimes it turned out it was the ground was loose.
-
good point didnt think to tell him that
-
Check and see if you have spark then see if when you crank it your plugs are wet. if it sat for a long time you probably need to go through the carb. if the plugs arent getting gas then most likely the float is stuck in the carb and wont let gas in.
-
anybody else i seem to remember some one from up north with some trucks set up this way
-
Thanks thats the kind of input i was looking for.
-
im setting up a flat bed and want to run a couple pumps off of one big diesel anyone run something like that and have any suggestions or ideas.
-
I use 200 ft sections and 100 ft sections r1 when you start pulling 300 to 400 ft of hose around it gets heavy. r2 is alot heavier at 300 ft than r1 is. but i also carry 50 and 25 ft sections you never no when your going to need another 10 to 20 feet its nice to pull out a little section instead of another 100 ft.
-
When i first started years ago i used a flojet for a while until i started downstreaming. imho it put to much chem on the surface you spend more time rinsing plants and such.
-
Thank's jeff that's very helpful it's always nice to be able to see how others word things. Do you mind if we change a few things and use it.
-
When i looked into lining my box truck 10 years ago they wanted 1400 so i didn't do it, one of the worst mistakes i've made in my business. I now have a completely useless box truck behind my shop. Trailers aren't as big of a deal because they are pretty much easily replacable,but if you are running out of a box or pickup truck that is to much of an investment to lose.
-
thaks russ that what i needed to know
-
Russ can i run a tsf2021 or a tsf 2219 at 3000 psi with 20 hp. the general pump website says i can use 20 hp but i want to no real world if it will work.
-
Thats a question that i ask myself often, as i have had to fight my way out of situation at 3 in the morning one time. I think if i was to carry a gun i might have shot somebody that night. I watch my back all the time at night.
-
I have a 24foot open tailer with delco,hotsy,hydroblaster burners custom made skids with honda,kohler,briggs motors all general pumps 275 gal tank adding another one or going to one bigger tank. 30 surface cleaner 28 surface cleaner 18 surface cleaner 600 ft hp hose 200ft low pressure hose 35 gal chem tank shurflo and hose reel for it. looking for space to mount a hose reel for couple hundred foot of fire hose.
-
Stay away from hydrofloric acid its to dangerous to chance. ive burned myself with a mixture of hydroflouric and phosphoric it wasnt pretty. was probably the most intense pain in my life. I thought i got it rinsed and nuetralized but about thirty minitues later the pain started i dont know if it was the hydro or the phosphoric but it ate my skin under my fingernails to the bone i thought i was gonna die probably lucky i didnt. needless to say i dont carry any liquid acid anymore.
-
Fix the water drips they will rot your floor and if left long enough rust your box rails. if you can afford it Linex the floor or epoxy paint it. i went the cheap route with my box truck and now it just sits behind my shop with the box rails completely rusted away and a soggy floor. anybody want a rust bucket.
-
Jays Equipment in orlando 1-888-458-8505,Cress chemical and equipment in orlando 800-425-2846 both companies are good people. water cannon is a mail order place no show room
Florida Guys I Need help
in Tools, Equipment & Basic Maintenance
Posted · Report reply
Kory there is a company on ebay i think its called florida hose guys they seem to have good prices. i havent bought from them so i cant vouch for the hose personally. Or you could get on I4 and come on over to the orlando northern store im sure they have r2 hose.