white rails

[bigchaz 157]

Have a deck with behr solid on the rails and try as I might I only got about 90 percent of it off. Ended up selling the customer on doing a two tone with white railings

What is the best way to stain that? I was wondering If i need to prime to make sure none of the remaining behr decides to come off, but no Idea what to use. Cant find cabots problem solver primer in any stores

I did see however, Cabot Pro VT solid color stain. Anyone use this? Says its self priming and made to go over existing painted surfaces.

http://www.cabotstain.com/cabot/pdf/PROV0800.pdf

[PressurePros 248]

The Cabot's ProV is good for vertical surfaces. You may need two coats.

Two tones are a pain in the arse! Takes about twice as long as a regular stain.

[bigchaz 157]

I figured two coats just to even out the parts that are bare wood versus the behr that didnt come off. Normally would charge more for two tone but since I failed to get the stain off as promised, this was the next best compromise

[bigchaz 157]

anyone else?

what do yall use for two tones?

[RPetry 564]

Cabot's 7400 series oil-alkyd.