Jump to content
  • 0
Sign in to follow this  
Jim Eme

Low Cost Recovery

Question

Can a recovery system be put together for under $1,000.00 ? My rig is a 4gpm cold & a 8gpm hot with a 90 gallon tank. All the commercial recovery units are just to expensive for me right now. I work in the San Diego area doing mostly flat work water only, no chemicals. I have some work to bid and there is no recovery back to the property available.

Thanks in advance for any and all suggestions. Been reading this forum for quite awhile and it has always been helpful.

Jim

The Clean Machine

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0

You can make your own simple unit with a drain seal and pickup pump. Or make a custom insert for the drain with a sump pump.

If you need to pickup off the ground with no real area to act as a sump you are going to have an much more difficult time of making or finding something for under $3000 that is worth purchasing.

Share this post


Link to post
Share on other sites
  • 0

Do you already have a generator to run a vacuum and/or sump pump?

If yes, then you can do it for that price, if no, then you need to spend a bit more.

Give me a call if you want, and I can give you some ideas based on what you have to tell me on the area being washed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×