Chappy 138 Report post Posted March 28, 2008 This is a recent job I did. Wicker furniture with teak accents. Cleaned with efc and WTW warm honey gold. Share this post Link to post Share on other sites
0 Chappy 138 Report post Posted March 28, 2008 this table was made of rough hewn Balinese Teak and had an unknown sealer on it. It had to be stripped with paint stripper, sanded to remove really rough spots and furrs and then WTW applied. I did several coats, rubbed in each coat to give it the shiny appearance. the last pic was just at a different light level and its not really that dark. The second pic is best Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted March 28, 2008 Beautiful! :lgbow: Beth Share this post Link to post Share on other sites
0 Kory 14 Report post Posted March 28, 2008 Tampa areas woody ladies & Gentleman. Great job John you have no compitition from me when it comes to the wood. Share this post Link to post Share on other sites
0 Celeste 341 Report post Posted March 28, 2008 Jon - that work is STUNNING! If you can snatch a couple of those chairs up for me please :) Is that someone's personal home????? Celeste Share this post Link to post Share on other sites
0 Chappy 138 Report post Posted March 29, 2008 personal home. on several acres on a lake. Next door to that Ipe dock I did last year. Its funny when you talk to "the richest 1 percent" how decent, down to earth they are and most are self made. But we should make them pay their fair share, doggonnit! Share this post Link to post Share on other sites
0 MMI Enterprises 289 Report post Posted March 29, 2008 Nice old world look ya got there Jon..good going!! ps- can ya share anything of rubbing methods, grits or sanders used? Share this post Link to post Share on other sites
0 Chappy 138 Report post Posted March 31, 2008 Nice old world look ya got there Jon..good going!!ps- can ya share anything of rubbing methods, grits or sanders used? no! Just kidding. I used the osborne brush to sand and som 60 grit paper for minor spots. 1st coat was brushed on the wiped completely dry. She wasnt happy with the way it looked pluss there were some spots completly bare, (I think her husband sanded a couple spots 'cause my pics after I was done the first coat showed no missed spots.) Any way I did 3 more coats several days later. An hour or two between coats and just wiped it in with a rag, just like wiping a stain on interior furniture. Share this post Link to post Share on other sites
This is a recent job I did. Wicker furniture with teak accents. Cleaned with efc and WTW warm honey gold.
Share this post
Link to post
Share on other sites