water in my readyseal

[CLASSICPW 14]

I had a 5 gal of readyseal out back this winter and water leaked into it. Has anyone had this prob and is there any good tips on removing the water?

[MMI Enterprises 289]

Maybe find out if product is ok to try and freeze...maybe it act similar to vinegar.

In making vinegar, since it don't freeze ya can strengthen it by doing such and taking the frozen water off top.

[CLASSICPW 14]

I actually think I beat it. I poured the sealer into a 5 gal bucket. when it settled I poured the oil off the top and left the water in the bottom.....which I poured into an old bleach bottle. I think It worked out.

[northwestern 14]

I actually think I beat it. I poured the sealer into a 5 gal bucket. when it settled I poured the oil off the top and left the water in the bottom.....which I poured into an old bleach bottle. I think It worked out.

Water will settle in oil given enough time 2-3 days/week. I would suck the oil out of the container instead of pouring it because you could remix while pouring. just use your delevan/shurflo do suck it out and you'll be fine.

[PressurePros 249]

Jamie, I would check with that Pierce guy at Ready Seal to make sure the products can survive the freeze/thaw cycles it has probably gone through.