RPetry 564 Report post Posted June 16, 2008 Any tricks? We have about $80 worth of natural bristle brushes that have been soaking in paint thinner for 5 days. Combed and brushed a few times but still "stiff" from WoodTux use. Hate to throw them out. Any help would be appreciated. Thanks. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted June 16, 2008 Degreaser.... Do you have some of Tom's 760? Beth Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted June 16, 2008 Beth, Yes, but NaOH will eat natural bristles. Not sure what a degreaser is, any suggestions that may be available locally? Thanks. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted June 16, 2008 Well, you just have to be careful how strong and how long you leave them. We use it. Call Rod on 240-876-0693 and ask him how strong he mixes and how long they soak. I know when the sealer is fresh, it's not a huge deal. Beth ps you need the NaOH to strip the sealer... Share this post Link to post Share on other sites
0 MMI Enterprises 289 Report post Posted June 16, 2008 Swirl them around in lacquer thinner till it gives then clean in degreaser. Share this post Link to post Share on other sites
0 YVPW 20 Report post Posted June 16, 2008 Crown actually makes a brush cleaner, you can get it in a quart sized can. I've used it before and it works great. You can also do like Kevin said use a solvent blend and then a degreaser. Just don't let the brushes stay in the solvent for long it will melt the bristles. Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted June 16, 2008 Swirl them around in lacquer thinner till it gives then clean in degreaser. Ok Kevin, I purchased some lacquer thinner. Still need to understand what a "degreaser" is. We only do wood, not hoods. Any commonly available product names would be appreciated. Thanks. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted June 16, 2008 Ok Kevin, I purchased some lacquer thinner. Still need to understand what a "degreaser" is. We only do wood, not hoods. Any commonly available product names would be appreciated. Thanks. 760 is a degreaser. A very, heavy duty, degreaser. Beth Share this post Link to post Share on other sites
0 MMI Enterprises 289 Report post Posted June 16, 2008 (edited) Well Rick I like to view them as any cleaner that effectively removes a synthetic or organic oil, grease, etc....and that would be what yer doing in using a degreaser after cleaning or getting things going in some the solvent. Mineral spirits in perticular like to leave some residue, lacquer thinner or acetone not really but when the stuff evaps off a residue of the stain oils or what have you may be left behind. So is just a standard recommendation to stick stuff in degreaser and water for a good thorough rinsing after using solvent. When using the stronger solvents your not gonna want to be soaking your stuff for long. If lacquer thinner doesn't clean them then acetone will...what's yer results? ps- purple power, krud cutter, 409, simple green, tsp Edited June 16, 2008 by MMI Enterprises Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted June 16, 2008 Kevin, You said: ps- purple power, krud cutter, 409, simple green, tsp Thank you. Have TSP somewhere and a few gals. of Simple Green for RS cleanup. Will try to clean this stubborn WT out of the brushes tomorrow. Appreciate the info. Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted June 19, 2008 Kevin, Thank you very much. A quick combing in lacquer thinner, followed by a 30 sec. bath in Simple Green cleaned the WT out of the brushes just fine. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted June 19, 2008 Hooray!!! :dancing: Beth :cup: Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted June 19, 2008 Beth, You're not kidding. I would have posted a nasty diatribe on TGS if I had to throw those brushes out due to a stain. Kevin saved me ~ 3 cases of Heineken. Share this post Link to post Share on other sites
0 MMI Enterprises 289 Report post Posted June 19, 2008 Always a pleasure Rick!!:beerchug: Share this post Link to post Share on other sites
Any tricks? We have about $80 worth of natural bristle brushes that have been soaking in paint thinner for 5 days. Combed and brushed a few times but still "stiff" from WoodTux use. Hate to throw them out.
Any help would be appreciated. Thanks.
Share this post
Link to post
Share on other sites