rick77 14 Report post Posted July 11, 2008 I left my X-Jet connected to the gun after the first two uses. I disconnected it prior to the third use and noticed there was quite a bit of corrosion between the connections. It's obvious to me now that I need to take the X-Jet off of the gun after each use and dry it. Should I also put something like WD-40 on it to prevent corrosion? The corrosion makes the quick connect hard to disconnect. Share this post Link to post Share on other sites
Lightning Gene 66 Report post Posted July 11, 2008 Switch to stainless fittings and your problem will be solved...brass corrodes Share this post Link to post Share on other sites
rick77 14 Report post Posted July 20, 2008 Switch to stainless fittings and your problem will be solved...brass corrodes Yeah man......the brass corrodes quickly! I've looked for stainless fittings for my X-Jet at the local box stores but no dice. Anybody know of a good online source? I've looked at several sites but could not find the stainless fittings. Thanks! Share this post Link to post Share on other sites
rick77 14 Report post Posted July 20, 2008 I found a site that has the stainless fittings. Xterior.com I've emailed them to get the part #'s so I can place an order. Do you guys that have X-Jets use stainless guns as well as the fittings? Share this post Link to post Share on other sites
Lightning Gene 66 Report post Posted July 21, 2008 Yeah man......the brass corrodes quickly! I've looked for stainless fittings for my X-Jet at the local box stores but no dice. Anybody know of a good online source? I've looked at several sites but could not find the stainless fittings.Thanks! everyone sells them pressure tek sunbrite invirospec ect ect Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted July 21, 2008 We get our stainless fittings from ACR PRODUCTS and Delco Cleaning Systems of Fort Worth, Pressure Power Washers Beth :cup: Share this post Link to post Share on other sites
PressureX 14 Report post Posted July 21, 2008 I just noticed the same problem on my my X-Jet. Def. is rusted. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted July 21, 2008 Replace all your brass QC's with stainless - get rid of your headaches. ;) Beth Share this post Link to post Share on other sites
James 625 Report post Posted July 21, 2008 Just rinse them well or a little acid will reverse the action. I've had the same connectors from the start. Share this post Link to post Share on other sites
rick77 14 Report post Posted July 21, 2008 Just rinse them well or a little acid will reverse the action. I've had the same connectors from the start. What kind of acid do you use for this? Share this post Link to post Share on other sites
rick77 14 Report post Posted July 26, 2008 Replace all your brass QC's with stainless - get rid of your headaches. ;) Beth I got the stainless QC's the other day. Zero sign of corrosion after 7 hours of use yesterday. No need to rinse with acid, just a quick rinse with straight water. These stainless QC's are so much better than the brass QC's! Thanks for the tip!!!!!! Share this post Link to post Share on other sites
Lightning Gene 66 Report post Posted July 27, 2008 welcome come again Share this post Link to post Share on other sites
rick77 14 Report post Posted July 27, 2008 welcome come again Ooops, I forgot to thank you Lightning Gene! You were the first in the thread to suggest that I switch to stainless. Great advice! Thanks Share this post Link to post Share on other sites
