CLASSICPW 14 Report post Posted October 6, 2008 The reset on my burner keeps popping and it's not comming on... any suggestions Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted October 6, 2008 Machine make and model? 12 or 120 volt? Reset on panel or motor? Need lots more info for a proper diagnosis. Share this post Link to post Share on other sites
CLASSICPW 14 Report post Posted October 6, 2008 Hydrotek 30005 120 volt wayne burner reset on the burner Share this post Link to post Share on other sites
charlie 14 Report post Posted October 6, 2008 call hydrotek up i am sure they can help you Share this post Link to post Share on other sites
douseahouse 21 Report post Posted October 7, 2008 i have a hot water machine by hydrotek and have talked to the service center in my area when i have a problem. i have also talked to russ johnson when i have a problem. no comparison when it comes to price and service. russ has saved me so much money and has walked me through so many repairs. this guy really knows his stuff. i had a similar problem with my machine. i have a 12vdc beckett burner. the breaker on my machine goes to the ignitor and motor which come on at the same time. the motor has a coupling on it that drives the fuel pump. my fuel pump was binding and putting a load on the motor which in turned tripped the circuit breaker. i'm not sure if this is related to your problem but i thought i would offer my experience. call russ tomrrow, rando Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted October 7, 2008 Sooooo....Jamie...did we get this fixed? Share this post Link to post Share on other sites