big mike 14 Report post Posted April 27, 2009 OK, I asked this over at ***** but I guess no one can help. I need to know where the return diesel line goes from the bottom of the coil housing. I know there's a return from the fuel pump to the tank, but I can't tell where the coil return goes. I am rebuilding a Pressure Pro skid that recently caught fire, and the lines all melted. I'm thinking that that both returns are spliced together prior to entering the tank, but I need to make sure. If you have a PP skid, could you please take a look? Pics would be great if possible. Thanks. Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted April 27, 2009 The line that I think you're referring to comes straight out the bottom of the coil housing about center? That is a condensate drain for any moisture build up in the housing and should have a tube straight down to beneath the machine for neatness sake. It keeps the drips off the equipment, that's all. Share this post Link to post Share on other sites
big mike 14 Report post Posted April 27, 2009 Thank you Russ. I knew it was simple. I just wasn't sure because my other skids have vertical coils. Thanks again! Share this post Link to post Share on other sites
