RSuds 24 Report post Posted November 20, 2009 Some times they come out great, We used Safe restore anf it worked great on this one. Share this post Link to post Share on other sites
0 Pat Norman 18 Report post Posted November 21, 2009 A strong roof mix always worked great for me. Maybe add a little butyl or caustic on regular brick. Was that a stucco chimney or painted brick or what? Great job! Share this post Link to post Share on other sites
0 chrishartje 15 Report post Posted November 21, 2009 Nice work! What was the dwell time with saferestore? Share this post Link to post Share on other sites
0 HighTide 14 Report post Posted November 21, 2009 Thanks for sharing as I am sure the homeowners were happy with that job. Great work! Share this post Link to post Share on other sites
0 John Doherty 126 Report post Posted November 21, 2009 Wow looks really good. Did they replace the rusting chimmney pan, if not you can charge them again next year for the same job! Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 21, 2009 Looks like a paint job! How are you applying, Brian? Also, do you find you need pressure when removing rust? Share this post Link to post Share on other sites
0 DAVID V 22 Report post Posted November 21, 2009 Looks great, Brian. How ya been? Share this post Link to post Share on other sites
0 Doug Dahlke 114 Report post Posted November 22, 2009 I have used ox on a bad rust stain going down an vinyl covered chimney. Didn't need any pressure to get it off. Just let it dwell and rinsed it off with a garden hose. Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 22, 2009 Stucco is a funny beast. Up here we have much more real stucco than what the guys in the south call stucco (Dryvit). I've encountered new construction with a bad stucco mix and oxalic or phosphoric will cause efflorescence. Its not commonplace but it does happen and having SafeRestore in your inventory isn't a bad idea. Brian, I asked about the application and pressure because of the yellow noodle. We can usually get away with X-Jetting a buffered acid on. Share this post Link to post Share on other sites
0 Doug Dahlke 114 Report post Posted November 22, 2009 [quote= having SafeRestore in your inventory isn't a bad idea. I agree. Safe Restore is great stuff. Share this post Link to post Share on other sites
0 RSuds 24 Report post Posted November 22, 2009 (edited) We just moped it on and let it sit for a couple of minutes, as we got higher we had to scrub it on 2 -3 times. We really did not use any pressure. I use the safe restore a lot under the windows on stucco and they come out great as well. It is a little expensive so that is why most of the times we mop it on. It looks like I will use some safe restore on this Mansion job that I think we are going to get it is 57,000 sq. ft. with a long wall around the property. Edited November 22, 2009 by RSuds Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted November 22, 2009 That's purty durn big. Is that on the Main Line? Share this post Link to post Share on other sites
0 RSuds 24 Report post Posted November 22, 2009 No it is Elkins Park. Share this post Link to post Share on other sites
0 Andy Hinson 14 Report post Posted November 23, 2009 Awsome job on the chimney! Didn't know safe restore would remove rust like that. Share this post Link to post Share on other sites
Some times they come out great, We used Safe restore anf it worked great on this one.
Share this post
Link to post
Share on other sites