Little Buddy 14 Report post Posted March 28, 2010 Is there a trick to make the stripper stick to horizontals? I'm using F-18 and it seems to be working excellent on the floor but isn't as effective on the spindles and such because it does stick. Thanks for any input. -JL Share this post Link to post Share on other sites
0 James 625 Report post Posted March 28, 2010 Welcome to wood care ! did u do a test spot on the spindles as well as the floor? Verticals do not wear like horizontals and are more difficult to strip. Share this post Link to post Share on other sites
0 offduty 25 Report post Posted March 28, 2010 barlox Share this post Link to post Share on other sites
0 KC Deck 14 Report post Posted March 31, 2010 I've used a few drops of Dawn dish washing soap. Seems to work pretty well. Share this post Link to post Share on other sites
0 drush 14 Report post Posted April 23, 2010 Hey LB... if you're still looking for a lit'l trick, e-mail me & I'll give you one that seems to work pretty well... David Share this post Link to post Share on other sites
0 Little Buddy 14 Report post Posted April 24, 2010 David, whats your email Share this post Link to post Share on other sites
Is there a trick to make the stripper stick to horizontals? I'm using F-18 and it seems to be working excellent on the floor but isn't as effective on the spindles and such because it does stick.
Thanks for any input.
-JL
Share this post
Link to post
Share on other sites