jkevin 15 Report post Posted April 22, 2010 have a landa cold water 3500 psi 4gpm my question is when i pull the rope to start it seems to build pressure so i need to have the trigger pulled in order to start. any clues why? Share this post Link to post Share on other sites
Scott Stone 604 Report post Posted April 22, 2010 Because the engine is turning. Your unloader might not be releasing at as low a pressure as you are used to. It could be going out, but it could last a VERY long time like that, too. Share this post Link to post Share on other sites
charlie 14 Report post Posted April 22, 2010 call this landa dealer in wi. maybe they can help 1-262-549-9191 Share this post Link to post Share on other sites
jkevin 15 Report post Posted April 22, 2010 i will do that thanks Share this post Link to post Share on other sites
Joe Ortiz 14 Report post Posted April 22, 2010 No easy start valve, or by pass, I have the same problem on my hotsy. But i will be replacing the unloader to a newer style. with a bypass hose Share this post Link to post Share on other sites
