Adams Injector vs. GPHigh Draw Injector

[TiogaWindowCleaning 14]

Besides the fact that Adams is good for using acids...what is the difference between the injectors?

I am running a small washer compared to most of you (3,000psi/2.8GPM) and am trying to decide which injector to get for my down-streaming set up.

I am learning here fellas so please don't rip me apart for having a small machine...at least its a Honda engine with a good pump...I knew that much =)

So...Adams or High Draw???? Which one and why?

[Alexy 85]

Adams,

Very reliable works well with a longer hose and is easilly rebuildable. Depending on what you are downstreaming they last a pretty long time too. The general ( chinese junk) and the like I would pass on completely. I have a bin in a van that has about 14 of them that are dead from the seals the seats or springs being bad so they don't hold up too well. the adams lasted a good long time ( 8 months) for us we do KEC work and they get used just about every night. we switched to the check valve ones made by Bob at Pressure Tek and they have been going good for a year or more before they need replacing.

[Russ Spence 76]

Adams all the way, I had trouble running longer hose with the GP and none with the Adams

[FullBlast 14]

Does the Adams draw as much as the GP or more??

I can't get my GP to draw enough even when I have a short hose on it!!