I have avoided doing woodwork since I started this business early this year. I have had a couple people ask me recently about it so I figured I would give it a shot but obviously wanted to practice first. Here are some pictures of an area that I did. I still need to let it dry, sand, then stain.
I used 240 degree water, 2500 psi, turbo nozzle with 12.5 SH.
I have avoided doing woodwork since I started this business early this year. I have had a couple people ask me recently about it so I figured I would give it a shot but obviously wanted to practice first. Here are some pictures of an area that I did. I still need to let it dry, sand, then stain.
I used 240 degree water, 2500 psi, turbo nozzle with 12.5 SH.
Share this post
Link to post
Share on other sites