randy miller 14 Report post Posted August 26, 2012 we have a pine deck coming up that was stained 1-2 years ago the old stain in still in pretty good shape except in areas where sap was bleeding through the boards. Would like some advice on an easy to remove the sap! thnx Share this post Link to post Share on other sites
0 bigchaz 157 Report post Posted August 26, 2012 It can be problematic and recurring so the only sure fire way is to replace the boards. You can scrape the excess and clean with turpentine to try and wipe off the surface sap but i find that the sap veins can be deep and continue to leach out. If you are redoing with a solid you could probably try to just sand off and just hope for the best. Penetrating oil stains are the worst since they help push the sap up Sent from my DROID BIONIC using Tapatalk 2 Share this post Link to post Share on other sites
0 Christopher 102 Report post Posted August 26, 2012 Great info Charlie! Share this post Link to post Share on other sites
0 James 625 Report post Posted August 28, 2012 The new PT decks are very problematic with regards to sap. I have a deck that about 15 boards have been replaced and then some of those sapped. Very pricy deck and under a warranty from the builder. Just had another one get sapped pretty bad. The new wood blows. I have another one coming his week. Share this post Link to post Share on other sites
we have a pine deck coming up that was stained 1-2 years ago the old stain in still in pretty good shape except in areas where sap was bleeding through the boards. Would like some advice on an easy to remove the sap! thnx
Share this post
Link to post
Share on other sites