Klean Spray 14 Report post Posted December 11, 2013 I'm installing in a new enclosed trailer two tanks. One for water supply and the other for storage of Chlorine( Sodium Hypochlorite ). In the past I have used the bulk head fittings with the Viton Gaskets and attached my supply water line with clear poly braided and then just a PVC ball valve into the Chlorine Tank so I could fill buckets. Sooner or latter the Drip-Drip-Drip seems to start on either the water tank or Chlorine Tank bulk head fitting. Is it possible to rig a diiferent way or use something different other than the "Black BulkHead Fittings" ? Any suggestions? Thanks Share this post Link to post Share on other sites
Douglas Hicks 128 Report post Posted December 11, 2013 Where is the leak? Threads, between the bulkhead and the fitting, at the hose/fitting? Are all the fittings metal or plastic? Share this post Link to post Share on other sites
Klean Spray 14 Report post Posted December 11, 2013 The are plastic fittings leaking from the black viton or rubber washer on the bulk head itself. When I replace the washer on the bulk head fitting then of course no more problem for roughly 6-mths or so. Share this post Link to post Share on other sites
Andrew Bandarovich 39 Report post Posted December 12, 2013 Get your tanks made by Ronco plastics. They will weld fittings in where you need them. Share this post Link to post Share on other sites
