Chuck Richard 14 Report post Posted March 1, 2003 This is what I use. You can make one for about 20-30 dollars. It can be adjusted for diffrent things. It has a max draw of 5-1. This is good for when you want to keep corrosive chemicals out of your hoses, pumps, and sprayers. When ever the thing gets to corroded, chucnk it and build another. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 1, 2003 Chuck, What size tee are you using? I compared a 3/8" one to the zero nozzle that's needed for the inside, but it was to small and a 1/2" one seems so big, plus the weight. Share this post Link to post Share on other sites
Mike Williamson 198 Report post Posted March 1, 2003 Chuck: I have looked at both HD and Lowes, and cannot find a bushing that is threaded both inside and out! Any suggestions as to where I can find this? Thanks! Mike Share this post Link to post Share on other sites
Jon 533 Report post Posted March 6, 2003 Try local hydralic hose stores, they should have everything you need. Jon Share this post Link to post Share on other sites
Chuck Richard 14 Report post Posted March 6, 2003 Your right jon, if you can't find it there they don't make it. Share this post Link to post Share on other sites
