x-jet transformed into an injector?

[CCPC 26]

Anyone no why you couldn't refabricate the fittings of an x-jet and run in like you would a downstreamer directly after the pump?

[squirtgun 122]

oh,I glad I'm not the only one that has thought of that.

[Russell Cissell 65]

Lance

What is your end goal? What are you trying to accomplish?

I've seen the opposite of what you describe done many times.

For instance on a machine with a 13 HP Honda, If you take a downstream injector and fit it with a male QC on the inlet and a female QC on the outlet side you can drop in a 0 degree tip with a #20 orifice. Now if you place that rig at the end of your lance or directly into your gun it will perform like an X-Jet

[CCPC 26]

Lance

What is your end goal? What are you trying to accomplish?

I've seen the opposite of what you describe done many times.

For instance on a machine with a 13 HP Honda, If you take a downstream injector and fit it with a male QC on the inlet and a female QC on the outlet side you can drop in a 0 degree tip with a #20 orifice. Now if you place that rig at the end of your lance or directly into your gun it will perform like an X-Jet

I'm trying to achieve the draw of x-jeting with the convenience of downstreaming.

[aquabob 14]

you wont get that much draw with 100ft or more of hose

on the out side of an x-jet. the back pressure will

reduce the amount of draw.

[CCPC 26]

you wont get that much draw with 100ft or more of hose

on the out side of an x-jet. the back pressure will

reduce the amount of draw.

yeah, I know. I was more or less thinking out loud when I posted, but after thinking about it, realized that because of the way the x-jet works, there would be know way it could be used in that way.