Jump to content
  • 0
Sign in to follow this  
Limeade

Good work? Or bad work? With pictures

Question

Ok well I did a house, and a portion of a fence for practice and a little side cash.

Here are the pics, I only used dawn soap. Nothing else, so I may have been able to get it cleaner with something else.

My problem is, I was able to get the black crap off, but I'm not sure if the brick itself should look better. I mean when you go and clean a home, one similar to the one I did, does the brick shine brighter or something? lol, I'm still gaining experience.

Critique me.

PICS REMOVED UNTILL I HAVE TIME TO RESIZE THEM

Now the fence I just used soap and water. I know that I should of used a cleaner and a brightener, but like I said, it was a spur of the moment thing. The fence is due for a replacement, so I gained a little practice.

Share this post


Link to post
Share on other sites

16 answers to this question

Recommended Posts

  • 0

Why didnt you use any bleach on the mold & mildew on the brick, it will make your work easier try it

As for the fence soap isnt really going to do anything

The pics look good!! read up on old post and you will learn how to do it easier with greaat results

Good luck and ask questions

JL

Share this post


Link to post
Share on other sites
  • 0

Yikes!! Do you know what type of brick that is? Its called "sand-faced" brick. It is actually red brick with a coating of white. (If you look closely, you will see that you did remove some of the coating.) I have seen entire houses that were "cleaned" and had the coating removed from the foundation all the way around the house. There is no way to fix it once the damage is done. (The customer wound-up removing the coating from the entire house to "fix" it.)

With this type of brick, use much less pressure and for areas with embedded mold, spray a solution of bleach or chlorine to clean. In order to change the pressure, use larger tips, do not adjust the unloader. If you normally use a 25040 tip, try a 25120 tip to reduce the pressure to about 500 psi without reducing the flow. Hot water really helps too.

Also, you really need to use a sodium hydroxide-based cleaner for the fence, followed by a light application of (I prefer) oxalic acid to neutralize the cleaner and brighten the wood. I like to use a 25100 tip for fences and decks.

Share this post


Link to post
Share on other sites
  • 0

Thanks, I didn't know that about the brick. But as far as I know, it was like that, but maybe I'm wrong. Also I should have made this clear, I did use chlorine to clean the mold, but I used soap and water to clean the non mold covered brick.

Can you guys post some before and after pictures?

My main thing is this, I just don't know whats clean enough, do you get what I'm saying, what looks great to me, may not look great to more experienced guys, and even scarier is the fact that it may not look good to the customer.

Share this post


Link to post
Share on other sites
  • 0

OK so can someone tell me how to avoid this in the future? Sideing is pretty easy to do, but with brick there seems to be more of a technique.

I understand that I should use less pressure, but my machine is only 3000 psi as it is. If I bump it down even more I would think it couldn't get that hard stuff off. Now everyone is telling me chemicals, which makes sense for algae, and mold, but can they get off really built up stuff.

For instance not something that is just a color on the brick, but more of a buildup, something thats thick and on there good?

How do I let it "cleaner" sit longer without it drying up also? Do I wet it, or should I put more on.

Share this post


Link to post
Share on other sites
  • 0

Get some larger tips, you'll see that they will give you plenty of oomph (at least as much as you can get with 3 gpm). After washing off the loose stuff, use a pump-up sprayer to apply a 3% solution (sometimes you can use less - you'll just have to experiment) of bleach to all discolored brick/joints. Work you way around the house, and by the time you get back to where you started, all the discoloration should be gone. Re-apply if needed. No need to rinse if you are applying to brick. This is the secret to cleaning brick without beating it - or you - up.

Share this post


Link to post
Share on other sites
  • 0

A quick fyi, some people actually have paid money to get the white washed look on thier brick and I have been asked by a number of our clients to make sure not to remove it as it is something they like in the appearance.

btw, the brick looked clean and free of mildew/algae which is the brunt of what most house cleaning is about. Good job. My only suggestion is to avoid dawn in most applications. It is not compatible with bleach and will release some noxious gases. Palmolive antibacterial dish soap makes a good foaming agent to add for cling and surface dwell time and works well with bleach.

I use 2oz./5gal of solution

Rod!~

Share this post


Link to post
Share on other sites
  • 0
A quick fyi, some people actually have paid money to get the white washed look on thier brick and I have been asked by a number of our clients to make sure not to remove it as it is something they like in the appearance.

btw, the brick looked clean and free of mildew/algae which is the brunt of what most house cleaning is about. Good job. My only suggestion is to avoid dawn in most applications. It is not compatible with bleach and will release some noxious gases. Palmolive antibacterial dish soap makes a good foaming agent to add for cling and surface dwell time and works well with bleach.

I use 2oz./5gal of solution

Rod!~

Thanks, that makes a lot of sense.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×