shawn_shawn 14 Report post Posted September 4, 2006 does Anyone Know If The P.s.i. Can Be Adjusted Up On An Rk-43 From Delco??? it Doesn't Seem As Powerful As It Was When I First Got It. (3 Yrs Old) shawn Nihen northeast Cleaning & Maintenance 25 East Bertsch St. lansford, Pa 18232 Share this post Link to post Share on other sites
PressurePros 248 Report post Posted September 4, 2006 Is this a subjective feeling or did you actually put a pressure guage in-line with the right nozzle and test it? It could also be something as simple as worn nozzles. Get a new nozle on there that will give you your rated psi, plumb in your pressure guage and se if you get what you are supposed to be getting. If not, you may need to rebuild your pump. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted September 4, 2006 Shawn, After 3 years of use, you can readily expect the machine to lose pressure in one way or another. As Ken said, it may be as simple as a worn nozzle, but you may also have leaks in a hose or connection, a clogged filter if you use the hp ones, a worn unloader, slipping belts, or low engine rpm. Share this post Link to post Share on other sites
James A. Lewis 14 Report post Posted September 8, 2006 sounds like an unloader to me. Just replaced one myself. Share this post Link to post Share on other sites
