Chappy 138 Report post Posted March 16, 2007 Is there any problem taking Thompsons off PT wood? I dont know yet if its THompsons Advanced or Water seal. I need to look at it next week. Share this post Link to post Share on other sites
0 Deck Guy 14 Report post Posted March 16, 2007 A mild stripper should do it. Thompsons is crap. Share this post Link to post Share on other sites
0 KC Deck 14 Report post Posted March 16, 2007 Depending on how long it has been since it was applied, it should all be worn off. But like he just said, a mild strip should do the trick just fine. Share this post Link to post Share on other sites
0 Jarrod 22 Report post Posted March 16, 2007 Very easy to strip. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted March 16, 2007 Some of their latest formulations have added some durability but it still is not a problem to remove. If it is either the clear or tinted versions, they are easy to strip. If it is the latex version, then you may have a little more difficulty. Rod!~ Share this post Link to post Share on other sites
0 seymore 90 Report post Posted March 16, 2007 Do a test areaaaaaa :cool: Share this post Link to post Share on other sites
0 Chappy 138 Report post Posted March 16, 2007 Test, test, test. Ive learned my lesson. But I wanted to see if it had special problems i needed to be aware of. That last behr deck looked like it was going to be easy, and the test spot came up nice. If I had some ox with me when I did the test, i would have known something was wrong because it didnt brighten at all after stripping it. Share this post Link to post Share on other sites
Is there any problem taking Thompsons off PT wood? I dont know yet if its THompsons Advanced or Water seal. I need to look at it next week.
Share this post
Link to post
Share on other sites