I have searched for mud dobber but could not find anything with the search function. Does anyone have a chemical recommendation for removing the mud haze left behind on EFIS and aluminum soffit? My standard mix is Simple Cherry and 12% using a down streamer on a 6.5 Hydrotec.
There is not a bit of mold - but there are tons of mud dobber nests. I am working on two very large homes 4.5 stories on the lake side and 1 story on the front. As you can tell they are on extremely steep lots (as most are here)at the Lake of the Ozarks.
There is very little room between homes to maneuver my Coress wand so most of it will be done off a leg leveling ladders with a shooter tip. These are also $2 mill.+ homes in an exclusive community so I want to make a great impression as the go-to-guy.
I have searched for mud dobber but could not find anything with the search function. Does anyone have a chemical recommendation for removing the mud haze left behind on EFIS and aluminum soffit? My standard mix is Simple Cherry and 12% using a down streamer on a 6.5 Hydrotec.
There is not a bit of mold - but there are tons of mud dobber nests. I am working on two very large homes 4.5 stories on the lake side and 1 story on the front. As you can tell they are on extremely steep lots (as most are here)at the Lake of the Ozarks.
There is very little room between homes to maneuver my Coress wand so most of it will be done off a leg leveling ladders with a shooter tip. These are also $2 mill.+ homes in an exclusive community so I want to make a great impression as the go-to-guy.
Any advice is much appreciated.
Jesse
Share this post
Link to post
Share on other sites