Decker 5er or deckster?

[rj242 16]

Hey Everyone,

I am seriously thinking about purchasing one of these rigs and would like to know if I can use toners, semitransparents, and solid color stains with these sprayers? I am just starting to get into wood working, and would like the best all around sprayer for decks.

I also haven't done that many decks, but the ones I have done were done with Olympic products (rolled and brushed). These products are easily accessible to me, and I have had decent results from them so far. Would there be any problem with these products and one of these machines? I believe most of the Olympic products are water soluble.

Thanks in Advance!

RJ

[PressurePros 249]

These are just my opinions.

Water borne products are umm, not wonderful. They are made for homeowner use and often contain too much acrylics. If you are going to use a box store brand of tinted sealer, use Olympic Maximum (not the Olympic regular which is absolute garbage).

You can use a Decker for anything though I would recommend using an airless for anything as thick as a solid stain or paint. Upgrade to an adjustable stainless wand when you buy your unit. I know the one that comes with the deckster is a toy. The upgrade allows you to control pressure at the wand. Thinner stains are going to atomize with a ton of pressure behind them and create the cloud that causes callbacks.

[MMI Enterprises 289]

I concure on the OMax... and if you go airless, which you should if shooting Omax, get a 311 tip for tight stuff and more control and a 415 for big swathy areas.

[alvisishere 66]

These are just my opinions.

Water borne products are umm, not wonderful. They are made for homeowner use and often contain too much acrylics. If you are going to use a box store brand of tinted sealer, use Olympic Maximum (not the Olympic regular which is absolute garbage).

You can use a Decker for anything though I would recommend using an airless for anything as thick as a solid stain or paint. Upgrade to an adjustable stainless wand when you buy your unit. I know the one that comes with the deckster is a toy. The upgrade allows you to control pressure at the wand. Thinner stains are going to atomize with a ton of pressure behind them and create the cloud that causes callbacks.

I have not seen the adustable ss wands for deckster....could you send a link on where to order one?

[PressurePros 249]

Adjustable Trigger Gun & Wand - New & Improved - Deckster Deck Sprayer and Accessories

[rj242 16]

Will it apply Wood Tux stains?

[Scott Paul 164]

Will it apply Wood Tux stains?

Yes it will apply Wood Tux

[rj242 16]

I was just looking at the Decker models on the sunbrite's website, and noticed a few things. They mentioned that the new pumps were 114 models instead of the older 112 models. Does anybody have a new model and have they had any problems with it. I also noticed that they have rebuild kits for 12dc and 120vac models, so I assume you can order either one. Anybody have a 120vac? If so how does it work? And one last question, I have read on some of the post about these pumps that you can get pumps with plastic parts or stainless parts. Is one better than the other?