CLASSICPW 14 Report post Posted January 24, 2009 I just realized last night that my pressure seemed lower than normal. I've got a Hydrotek sc3005. The guage is reading 1800 psi. Share this post Link to post Share on other sites
Mathew Johnson 123 Report post Posted January 24, 2009 I just realized last night that my pressure seemed lower than normal. I've got a Hydrotek sc3005. The guage is reading 1800 psi. Check the size tip you have in the end of the wand, It should have a 5 or 6 orifice tip for maximum pressure, Do you have a pressure or flow unloader? Check the unloader. Is the engine running at full RPM? Hope this helps. Share this post Link to post Share on other sites
James 624 Report post Posted January 24, 2009 Check for leaks anywhere, Check for semi- clogged filters , pump is going ? Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted January 24, 2009 Contact Tom Vogel of ACR products. He's an authorized Hydrotek dealer. 610-253-8005 Beth Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted January 24, 2009 p.s. Jamie, if you want to have someone in MD look at it, the only authorized dealer I know of in MD for Hydrotek is McHenry Equipment, McHenry Equipment - Cleaning Systems 301-663-4683 | 800-221-6905 | info@mchenryequip.com Share this post Link to post Share on other sites
