Brian 14 Report post Posted March 25, 2003 I am new to posting on these BB's so hopefully this is the proper forum for my question. If anyone can help I will greatly appreciate it. Is adjusting the unloader an appropriate method for achieving lower pressure, or is it wiser to change tip size to a larger orifice? Thank you for your input, Brian Caudle Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 25, 2003 Changing the tips is the best and most consistent way to achieve this. If you change the Unloader, then you are affecting flow also. Share this post Link to post Share on other sites
Jon 533 Report post Posted March 25, 2003 Welcome to the board Brian, it is a pleasure to have you as a member. When you have time would you kindly fill out the rest of your profile so we know where your from and what you do mostly. Thanks, Jon Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 25, 2003 Jon, Brian is from here in Maryland. :) We'll have to help him be less shy... Beth Share this post Link to post Share on other sites
Brian 14 Report post Posted March 25, 2003 Jon, I appreciate the welcome and have updated my info. One Tough Pressure, Thanks for the fast reply, I'll stick to changing tips, Brian Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 26, 2003 Brian, Your Welcome, and like the GAS Company says, "Glad to be of Service". Share this post Link to post Share on other sites
