Charles Wright 14 Report post Posted May 1, 2010 First of all hello, my name is Charles Wright and I am from Dothan, Alabama. I have recently entered the pressure washing business. When I purchases the rig, some wires were not hooked up on the gas burner. I need to fix that now as I may pull this rig to Mobile and volunteer with what may be a nasty oil spill. I figure that hot water is about as good as anything on crude? I will try and do online research but maybe somebody here can help me out. There are 3 wires loose. A red and white one are joined together and a black one is seperate. The burner sticker says it is a Beckett ADC model burner. I believe the wires run over to an oil pump marked Suntec A2VA-7116. As best I can figure I should hook up these wires on the coil. I hope the pictures help with my poor description. Any help is appreciated. Share this post Link to post Share on other sites
Joe Ortiz 14 Report post Posted May 1, 2010 Take it to a tech. a pro should give it an overview before you start to youse it,as someone may end up getting hurt or dead. just M. O. good luck Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted May 1, 2010 Joe is right. Take it to a mechanic so the wiring can be traced and hooked up properly. All we can do here is guess, and it could make matters worse. Share this post Link to post Share on other sites
Charles Wright 14 Report post Posted May 1, 2010 Take it to a tech. a pro should give it an overview before you start to youse it,as someone may end up getting hurt or dead. just M. O. good luck I'll take it to one if I can find one. Share this post Link to post Share on other sites
Russ Spence 76 Report post Posted May 1, 2010 [ATTACH=CONFIG]15236[/ATTACH][ATTACH=CONFIG]15237[/ATTACH][ATTACH=CONFIG]15238[/ATTACH]First of all hello, my name is Charles Wright and I am from Dothan, Alabama. I have recently entered the pressure washing business. When I purchases the rig, some wires were not hooked up on the gas burner. I need to fix that now as I may pull this rig to Mobile and volunteer with what may be a nasty oil spill. I figure that hot water is about as good as anything on crude? I will try and do online research but maybe somebody here can help me out. There are 3 wires loose. A red and white one are joined together and a black one is seperate. The burner sticker says it is a Beckett ADC model burner. I believe the wires run over to an oil pump marked Suntec A2VA-7116. As best I can figure I should hook up these wires on the coil. I hope the pictures help with my poor description. Any help is appreciated. Hey man I am in Prattville only a couple of hours up the road from you, if you dont mind the trip I have a guy that can take care of it up here. Share this post Link to post Share on other sites
usarose 18 Report post Posted May 7, 2010 Rus - what a gentleman you are. I need to call you about the free house wash deal you told me to call you about. Rob Share this post Link to post Share on other sites