Need Ball Valve advice, please.

[Paul B. 523]

Scott,

I may have even purched them at a local hardware store or Home Depot.

I'll have to look in my files to be certain - it's been over a year since I purchased

the last batch. I'll search my electronics files on Sunday and post results.

The valve is a PCi (Pressure Components Inc.) MPV-Series part.

[One Tough Pressure 580]

I thought Alan was the king of 3-way ball valves.

:lgbounces

Hers some valves for you Don. Note the first picture has 4 total. The gauge is there only for an after the unloader before the coil pressure check.

[Don Phelps 85]

Did they give you a discount for buying in bulk? :)

[Washaway 64]

Hers some valves for you Don. Note the first picture has 4 total. The gauge is there only for an after the unloader before the coil pressure check.

I think you missed your calling......you should have been a plumber!

[Adrian 155]

Sweet b.v. setup Alan. I failed to mention the reason I inquired to begin with is because my surface cleaner does have it's own trigger setup. So I thought it might be a time saver to have a b.v. on the end of hose before the trigger for a quick change to surface cleaner.

Now, I am thinking about doing away with the trigger on the surface cleaner and just adding q.c. It makes good sense and I am sure there is an adapter that will fit where the trigger was!!!! I could just set it up where my gun just plugs into the q.c. on the surface cleaner, and q.c. on all the lances. It may look like a Frankenstein by the time I am through.

Thanks for everyones advice and suggestions. Now I have more info to process to make a better mouse trap!!!! Back to the lab.