One Tough Pressure 580 Report post Posted March 1, 2003 Has anyone ever tried to strip or clean VCT with a surface cleaner? I know to much heat will bring up the tiles, but is their an approved way to use a PW skid for this? Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 1, 2003 Ok. Need a little more info from you. First of all VCT = Vinyl Tile on a floor yes? Please describe what it is you are doing, cleaning an existing floor that has old wax on it, or cleaning a new floor at the construction clean up phase? I would NOT use a pressure washer on it. You can use a pressure washer on tile in a kitchen where you have drains, but not in a room without them. VCT is a strip, mop and wax type thing. Give me some more details to help you with . :) Beth:) p.s. don't forget to add your city and state in your profile please.... you can also add an avatar if you like, and a signature that shows below your posts about your company. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 1, 2003 Yes, Vinyl Composition Tile is what I am talking about. The drainage is not a problem, but wanted to know if anyone has done the PW thing on them. I know all to well the real way to do it and thought maybe it could be sped up a little. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 1, 2003 We have not attempted it on VCT because of the concern for the backing. However, a surface machine is wonderful in a kitchen. I would stick to standard floor care... Strip, mop, wax, high speed buff w/ a machine. The liability is too great and if the mastic is not put on well, not enough, or whatever underneath....you'll be in a pickle. Beth Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 1, 2003 This particular floor is in my garage. I guess I will go ahead and test it to see what happens, since I do not care for it anyway. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 1, 2003 Well heck, go for it then. Please post some pics for others to see. :) I would not get your water too hot... and use a long squeege on an extension pole to help extract the water out of the garage. Just my .02 worth.... Beth p.s. try your house wash mixture on the floor, but be careful, it will get slippery. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 1, 2003 I was planning for just warm water and if that does not work, then some degreaser and run the SC over it again. Lots of grease, oil and tire tracks. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 1, 2003 Sounds like the degreaser will come in handy! Share this post Link to post Share on other sites
