Jump to content
  • 0
Sign in to follow this  
Celeste

Homeowner's Attempt w/ Ipe

Question

Here's what happens when the wrong things are done! Builder told HO that he needed to wash his new Ipe then spray ATO on (did not bother to tell him about back brushing). HO did one half of deck - next morning it was awful so he tried to strip himself. We'll be starting this one this week as an "emergency" :) No posts, spindles or handrails - should make things a little less complicated :)

Celeste

Share this post


Link to post
Share on other sites

14 answers to this question

Recommended Posts

  • 0

Oh according to the homeowner, he just put it in a pump up and sprayed away. Poor guy, all he wanted was a deck that looked like the ones he's seen in pictures. Funny, but I don't ever remember any ads that said "So easy to do, look at Harry Homeowner's work" :)

We'll be giving the F-18 Max a shot on this one.

Celeste

Share this post


Link to post
Share on other sites
  • 0

Seems that Mr. Homeowner put TWO GALLONS OF ATO on a 14 X 16 FT SECTION OF DECK. The unstained side is gorgeous after a good cleaning. The stained side is going to take another stripping - will be doing this afternoon if it doesn't pour down rain again. Had some very strange things happen during the brightening - some of the boards turned colors but then went back to normal. Very strange.

Celeste

Share this post


Link to post
Share on other sites
  • 0

He's a happy man now :) Says his deck looks like the photos that he looked at before he tried it himself ! We put Honey Teak on the Ipe then for the PT boards, we mixed Honey Teak with a little Mahogany Flame to match it all up.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×