Cleaning Bad Mildew/Old Stain

[seymore 90]

Here is section of a deck i cleaned today stripped p/washed and brightened.

All chems i make myself and were mixed at minimal strength.It took 3 hrs to complete the 700 sqft. deck strip.

[squirtgun 122]

Shane,

I see the Deck Gods have smiled on you yet again.Great job.

[seymore 90]

Thanks Scott...:lgbow:

It's good to see you around it's been a while hope all is ok in Ga.

[squirtgun 122]

It's going pretty good.We still have some gaps in our schedule but we have been wide open the last few weeks.

I put in a resume with the Dept. of Navy for a civilian job at the Marine Corp Logistics Base about 20 miles from here.If I get the job we will scale our business back to part time again. I will be work in the repair division rebuilding the equipment coming back from Iraq(Hummers,LAV's,tanker trucks etc.)One of the position I applied for is foreman for the pressure washing/steam cleaning shop.

This base also builds armor and air conditioning kits for the Hummers already in Iraq.That shop works 12 hr days,7 days a week trying to get our troops the kits so they have some protection from road side bombs.

[tropical wave 22]

Shane, tooooo :cool: I like the stripper dwelling pic...

Scott, very patriotic position.....them guys n gals over there can use that sort of help..... very cool gig :)

[seymore 90]

Thanks Mike :cool:

That's good to hear Scott! Like Mike said that is a very patriotic job position you are wanting.I hope it works out for you and you land the job GOOD LUCK!!

[seymore 90]

Here is another view of the rest of the deck.

[Beth n Rod 1,279]

Sweet! Beautiful work!

Beth

[seymore 90]

Thank u Beth ;)

[tropical wave 22]

Im assuming......."Super Cedar Gold"? will be going on in a couple days??

[seymore 90]

Mike

No Gold on this one.. i'm gonna be trying to match the mahogany looking back door so it's going to be Redwood Blend. :cool:

[James 625]

I can Sey No more. BleaCH Heads Are the best.................

[Tronman 14]

I have a relative that has a new condo with new wood floors. She thinks it has some type of protective coating but nothing extreamly visable. What would you recomend putting on it to protect it, Polyurethane?

[Tronman 14]

test test test

[seymore 90]

I have a relative that has a new condo with new wood floors. She thinks it has some type of protective coating but nothing extreamly visable. What would you recomend putting on it to protect it, Polyurethane?

I have no clue on interior wood i'm exterior only :cool:

[Beth n Rod 1,279]

Look into the line Sikkens has. They have interior wood products, I don't know if they can be used on a floor or not, but its worth looking into.

Beth

[Littlefield 65]

Tronman,

Oil based polyurethane is common. Minwax makes both an oil and a waterbased for floors. Waterbased takes more coats, but is more fun to use. Be SURE to read the can for the proper product, as different poly's are formulated for different applications.

Other choices if its really not sealed yet, Tung oil with some stain mixed in or high end water based epoxies that actually strengthen the surface of the wood....

[seymore 90]

Here are some finish pics stained in Gray Away Super Redwood Blend.