PRESSURE PACKED 14 Report post Posted March 15, 2006 I Am Doing A Barrier Wall For A Developement..my Question Is How Do You Estimate The Price. The Wall Is A Half Mile Long..i Will Be Doing Both Sides Any Input Is Greatly Appreciated...... Pressure Cleaning Plus No Mold Too Old! Paul Groditski Share this post Link to post Share on other sites
0 Littlefield 65 Report post Posted March 15, 2006 First, estimate the actual sqft. Half of a mile is 2500 + feet long, x the height. Is the height standard all the way down, or does it vary? Then, figure your price per sqft for concrete walls up to 8 ft or so. Figure your price per sqft fro above 8 ft, ie ladder work, pole work, or lift work. Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted March 15, 2006 Both sides = 1 mile or Both sides = 1/2 mile.... when you say," you will be doing".... does that mean PWing? If so , how high is it? You already have the length. You can bid by sq. ft. ( length x height) or linear ft.( a price that covers 12 " length and the height as well) My guess would be to bid by linear ft. for a project that long. As for the cost per L. Ft..... give this thread a few hours to boil and let Mr. Williams or James chime in they know their business really good and I believe are down in your neck of the woods. BUT you need to get some exact #'s on square or linear footage to come up with an accurate bid. Plus possibly be prepared to shave a few cents off of rate if you are competing with others for the job. Share this post Link to post Share on other sites
0 Jeff 232 Report post Posted March 16, 2006 THINK ABOUT WATER SUPPLY !!!!! How and where will you get water???? Share this post Link to post Share on other sites
0 PRESSURE PACKED 14 Report post Posted March 16, 2006 The Wall Is 8 Feet Tall Half A Mile In Length On One Side And I Will Tap Into A Fire Hydrant For H20... Thanks BASICALLY I WOULD LIKE TO KNOW HOW MUCH PER LINEAR FOOT Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted March 16, 2006 How dirty? Do you have hot water? Using chemicals? How desperate are you for work? I would bid about $2k. Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted March 16, 2006 If you use a hydrant , you will need a meter from your county or you could face some serious fines from them if you are caught w/o one. If you are going to risk it ( not suggesting) then you will definately need the right equipment to tap and also filter the h20 or it could damage alot of supply hoses and your PW unit. Just a ball park guess ( not gospel ) on the bid. 8 ft high on a linear ft bid. around 050-.70 per ft. and cover the cost of chems as well. Are you filling your tank or just running 1/2 mile of supply hose. Not trying to sound silly but that's alot of supply hose, plus the pressure from hydrant will mangle a garden hose and you will have to have plenty of back up. I really hope you have a tank on trailer or you will lose $$ in supply hose. The cost of the bid could cost you just as much in supply hose. Share this post Link to post Share on other sites
I Am Doing A Barrier Wall For A Developement..my Question Is How Do You Estimate The Price. The Wall Is A Half Mile Long..i Will Be Doing Both Sides Any Input Is Greatly Appreciated......
Pressure Cleaning Plus
No Mold Too Old!
Paul Groditski
Share this post
Link to post
Share on other sites