Mountain View 14 Report post Posted May 16, 2006 I've just spent about an hour touring around the Wolman's web site. Opinions on thier products? Some of them sound as if you can apply to damp wood, aka WTW. Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted May 16, 2006 I am Wolman Certified and I have never used any of their products. With water borne products you can get away with applying to higher moisture content wood. WTW is an oil. Share this post Link to post Share on other sites
0 tropical wave 22 Report post Posted May 16, 2006 ugh..... menards over here is pushing the wolman "clear waterproofer for your exterior wood projects" and "with easy water clean up"..... NOOOOOOOOOOOOO!!!! Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted May 16, 2006 Pete, Like many, I started off in this business with the Wolman's certified contractor program. Used their sodium percarbonate based powder wood cleaner and their F&P oil stain for the first 2 years. The cleaner was ok but expensive. Contrary to their directions, you still had to treat the wood with a mild acid after use. The F&P stain was ok, on par or maybe a bit better than similar consumer grade stains. Knew about Ready Seal but did not do enough business to order 50 gals. at a time on a "less than truckload" shipping basis. When Tom Vogel of ACR Products started carrying the stain, I drove up there in a flash. Gave away my last 5'er of F&P last year. Share this post Link to post Share on other sites
0 Mountain View 14 Report post Posted May 16, 2006 Thanks guys. I took the certification test yesterday. Just curious what you guys thought. I'll probably be using Bakers Grey Away as my prefered product and I can get acid, stripper, 12.5% raw materiels from a local chem supplier. Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted May 16, 2006 Pete, I took the certification test yesterday. Didn't cheat and take a peek in the manual, did 'ya? Did not know they still had the program around. I'll probably be using Bakers Grey Away as my prefered product and I can get acid, stripper, 12.5% raw materiels from a local chem supplier. That is a good choice of products and sources. Good luck on your endeavors. Share this post Link to post Share on other sites
0 Mountain View 14 Report post Posted May 16, 2006 Rick!! How could you say something like that!! Cheat, don't know the meaning of the word.:rolleyes: Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted May 17, 2006 Pete, Come on, fess up! In my day it was an "open book" test. Sneaked a peek or two. Was a very basic, but helpful introduction, to wood care. Learned the advanced degree from the great internet resources that we have today. Outstanding marketing on Wolman's part. Share this post Link to post Share on other sites
0 Heavyd 14 Report post Posted May 23, 2006 ive not used the Wolman products but they make the stuff our competitors use..and they have the market in KC. i heard Wolman make a product called woodrenew protectant? have lost jobs to them. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted May 23, 2006 We used Wolman's F&P prior to using Wood Tux four years ago. We'll never go back to it. Wood Tux delivers a superior looking result that lasts longer. Customers of ours who we have switched from F&P to WT say the deck looks better now than the first time we did it with F&P. Beth :cup: :groovy3: Share this post Link to post Share on other sites
I've just spent about an hour touring around the Wolman's web site. Opinions on thier products? Some of them sound as if you can apply to damp wood, aka WTW.
Share this post
Link to post
Share on other sites