Sprayer at harbor freight

[Kory 14]

Harbor freight tools has a 12V 15 gal. spot sprayer with a shurflo pump 10-40psi for 89.99 in a flier they mailed to me. If you look up on there web site its Lot # 9583. My Question is has anyone tried one of these? and how did it work? what distance can it be fired. I know its no Bryan Foamer but it might be worth a shot!

[PressurePros 249]

Would be fine for doing decks. Distance at best might be a few feet.

[jgoral76 14]

My experience with habor china is this' KEEP YOUR MONEY buy the good stuff because harbor china does not last . period.

[Russ Spence 76]

my shurflo is a 60 psi @1.8 gpm and i have a replica phelps wand and it will spray around 30 feet or so ,i have not measured i am guessing it may be a bit further.......not shure

[PressurePros 249]

On the web it is listed at $119.99. The flow on that thing is probably in the .5 range.

Russ, I'm trying to figure out what I am doing wrong. You get 30 feet of vertical spray from a ShurFlo pump??

[Dan Stapleton 14]

30 ft? What size orifice and spray angle tip?

[CCPC 26]

I can get about 30' with my 60/1.8 shurflo as well with a 0010 tip.

[Russ Spence 76]

yes ken ,

i didnt until i switched to a 150psi ag hose ,i have 200feet if hose and the little pump will shoot a long way ,now keep in mind that is with a straight stream ,if i seitch to a fan tip like a 40 it will only spray aroun 15 feet

[Dan Stapleton 14]

Thanks Lance and Russ. Ken, I get the same with a 0010. 1.8 60 psi.

[Russ Spence 76]

awesome dan that little pump is tough