aloha pc 14 Report post Posted June 16, 2006 I put a new injector on today and got nothing. I took the injector and attached it to the last fifty feet of my hose and it worked fine. Does it sound like my gun is messed up or something different? Share this post Link to post Share on other sites
0 Kory 14 Report post Posted June 16, 2006 Stupid question but did you have the right soap tip? Share this post Link to post Share on other sites
0 aloha pc 14 Report post Posted June 16, 2006 yeah, even tried takin the wand off to shoot it straight Share this post Link to post Share on other sites
0 CCPC 26 Report post Posted June 16, 2006 how much hose length were you trying to run it with when it didn't work? Share this post Link to post Share on other sites
0 aloha pc 14 Report post Posted June 16, 2006 Same as always, 200 or 250 feet. The injector failed the other day so I buy a new one. I put it on and start waiting for a nice flow of chlorine and nothing. I 'm puzzled. Share this post Link to post Share on other sites
0 Chappy 138 Report post Posted June 16, 2006 I have yet to be able to get soap from an injector with over 100 feet of hose. something about pysics. Share this post Link to post Share on other sites
0 K.J. Pressure Washing 14 Report post Posted June 16, 2006 I do it every day with up to 250 ft. of hose. I use the 2.1 mm orifice which came from Watercannon. Share this post Link to post Share on other sites
0 aloha pc 14 Report post Posted June 16, 2006 Damnest thing! Never had a problem until today. Thought maybe the gun was wasted. Share this post Link to post Share on other sites
0 PWkid 79 Report post Posted June 17, 2006 I use a chemical injector everyday with '300 ft of hose. I use a smaller oriface injector than is recommended. Share this post Link to post Share on other sites
0 mrklean 14 Report post Posted June 19, 2006 check to make sure all your orfaces are cleaned and open. Share this post Link to post Share on other sites
0 Barry M 73 Report post Posted June 19, 2006 Is your chem hose in good condition, no holes or plugged up? Share this post Link to post Share on other sites
0 Dave O 15 Report post Posted June 19, 2006 Do you have the right number injector for your machine? Also did you put it on with the flow arrow in the right direction? I know most come with the fittings on them and they are usually the wrong way for the machine. Then they just get put on that way without looking at the arrow of flow. Share this post Link to post Share on other sites
I put a new injector on today and got nothing. I took the injector and attached it to the last fifty feet of my hose and it worked fine. Does it sound like my gun is messed up or something different?
Share this post
Link to post
Share on other sites