Jump to content
  • 0
Sign in to follow this  
Proclean

Woodies - offer your price

Question

Hi all,

Hopefully the attachment will show.

Unique deck. Composite on floor and handrail.

Staining Cedar posts. Cedar top fascia and PTP arbor. Arbor is the pain because of protecting the rest of deck.

More time will be spent on protecting versus staining. I am curious to see what others would charge. I know this is a loaded question, but maybe answer could be more than $800, but less than $1200. As I am looking for a 1 day job with 2 guys.

You can send PM if needed.

Thanks,

Paul Dinos

Pro Clean Specialists

post-514-137772159206_thumb.jpg

Share this post


Link to post
Share on other sites

21 answers to this question

Recommended Posts

  • 0

Hey Paul.

I don't see an arbor and the top cedar fascia you mention is that the bandboard for the upper deck?

I see a simple 2x6 or 2x8 joisted shed roof on the upper deck. Ain't an arbor that thing that sits out in tha yard and have to weedeat around? :)

/neil

Share this post


Link to post
Share on other sites
  • 0

Arbor, trellis, etc. It is 2*6 with 1.5 spindles on top of that. This is main issue. Spray or hand brush? Hand brush means I don't do any work. My guys do. Your price is in my ballpark. Can we say a lot of plastic.

Thanks,

Paul Dinos

Pro Clean Specialists

Share this post


Link to post
Share on other sites
  • 0

Piece of advice, don't think of this a s a single tone job...think of this as the same thing as a two tone job. I say this, because to avoid getting sealer on the composite you will need to mask in the same way you would a two tone job. It will take extra time, and materials, and it will slow you down. This is more complex than you might think if you have not done one of these before. We've done them.....

Beth

Share this post


Link to post
Share on other sites
  • 0

Beth,

Thanks, I have done jobs like this. You are 100% correct. More time protecting than staining. Homeowner did not even think of staining until I meet with them today. I hate jobs like this and will price accordingly. It is worse than a 2 tone. With a 2 tone you can sand on wood, not so with composite. Taping, plastic, & water are a great friend. But it is hard to tell a home owner owner how much it is going to cost after they have gone way over their budget.

Jarrod,

Thanks, I'll let you know the end price.

Thanks,

Paul Dinos

Pro Clean Specialists, Inc.

Share this post


Link to post
Share on other sites
  • 0

Not sure of the proper architectural term for thr roof, but I call it a pergola roof. I did a similar job last week with a bit less sq. ft. (but it had a pergola), but it was all one color, and just a simple clean and recoat with Ready Seal...and I was just over $1000 on that job. Adding for PITA factor, I hope you can get at least 1.5 or 2 times that.

Share this post


Link to post
Share on other sites
  • 0

Job completed today. All in one day.

Heavy rain yesterday afternoon. No problem. WTW is the solution. 15 man hours to plastic off and about 15 man hours to stain. I'll post a picture to show the plastic. Used 3 mil - 2 deep. The homeowner used to work for porter paints and was 100% happy.

Plastic cost me nothing and can get it for free with enough timing - you pick up and comes on huge rolls.

I thought a lot about this one and it came out perfect. Big pay day.

Paul Dinos

Pro Clean Specialists, Inc

post-514-137772161362_thumb.jpg

Share this post


Link to post
Share on other sites
  • 0

This is the deck in plastic.

I keep reading about you guys - and gals - that are slow. Get out there and sell. I'm not even returning second phone call's and can't catch up. Slow season??? I haven't stopped since Feb. This economy is rocking.

If I get more of these composite decks - look out shane. I have more plastic than you. But I've got about 11K of Ironwoods to stain before Jan.

It's all good and the good Lord is watching out after my family. I can't stress that enough.

Paul Dinos

Pro Clean Specialists, Inc

post-514-137772161367_thumb.jpg

Share this post


Link to post
Share on other sites
  • 0

Thanks for the ear shane.

Jon, yes, free plastic - 3mils. But as always a catch. You have to pick up north of Atlanta and depending on width it has to be cut in half.

Let's say the roll is 4 feet. That means if you cut it in half you get 8 feet. The roll could have as much as 1000 yards or more. Think about this for a minute. The rolls are only limited me the weight issue. But here is the biggie. I get this stuff for free.

Opps.

Paul Dinos

Pro Clean Specialists, Inc

Share this post


Link to post
Share on other sites
  • 0

Jon,

Your it. I may even be heading to Nasheville in a several weeks. It is a great deal. The bigest problems are the roll size and that you have to cut it. I love the 6 foot rolls, but at 500#'s, it is quite a problem. The less than 200 # rolls are easier to work with. Can you imagine how much money several thousand square feet of 3 mill plastic costs. Private email me and we'll hook up.

Paul Dinos

Pro Clean Specialists, Inc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×