Jump to content
  • 0
Sign in to follow this  
Jeff

Bad Oxidation

Question

Check this place out, the faux siding is vinyl that is only 7 years old. I never seen vinyl siding like this before. The home owner wanted to know if I could restore it. I thought it was painted at 1st but it was not. The house is 1 block from the ocean and the oxidation on the siding is so thick. The home owner said his contractor said the siding is a life time siding and this home owner has never had the place washed. I told him we could clean it for thousands,. He's calling the manufacturer to see what they recommend.

The decks are a mess too, he says he sprays them every few years, overspray on many parts of this house. This is a million & 1/2 property in a well off section and he just let his parttime cottage home go to waste.

Some funky oxidation, thicker than I've ever seen. Nasty stuff

JL

Share this post


Link to post
Share on other sites

6 answers to this question

Recommended Posts

  • 0

E-plus or premier will strip that off but if the siding is deteriorating that bad I would be very careful. From what you describe it almost sounds like a dry rot type situation. Like the cheap plastic furniture gets after a few years in the sun.

Share this post


Link to post
Share on other sites
  • 0

Jeff,

I did a house yesterday that had that exact type and color siding. It too is heavily oxidized. This was actually the third time I have washed it and it was in the same condition the first time.

Since I downstream, I have no problem with the oxidation - I just clean it. Since I am not putting any pressure on the siding, I am not leaving any tell-tale wand marks. The customer is aware of the oxidation issue, but likes the look of the siding. When I wash, I am adding some liquid wax to my mix and washing at about 125 degrees.

Share this post


Link to post
Share on other sites
  • 0
Jeff,

I did a house yesterday that had that exact type and color siding. It too is heavily oxidized. This was actually the third time I have washed it and it was in the same condition the first time.

Since I downstream, I have no problem with the oxidation - I just clean it. Since I am not putting any pressure on the siding, I am not leaving any tell-tale wand marks. The customer is aware of the oxidation issue, but likes the look of the siding. When I wash, I am adding some liquid wax to my mix and washing at about 125 degrees.

John,

This man wants the oxidation removed, It used to be more of a cream color siding. Its a flipping mess. I dont think he's going to want to pay my price once I figure out how to do this

Jeff

Share this post


Link to post
Share on other sites
  • 0

Jeff, I have noticed these shake type designs not holding up well too. And the home owner's pay a bundle for the look. I think the material is to thick. I have seen mildew getting into the surface of a three year old job.

Share this post


Link to post
Share on other sites
  • 0
Jeff, I have noticed these shake type designs not holding up well too. And the home owner's pay a bundle for the look. I think the material is to thick. I have seen mildew getting into the surface of a three year old job.

It is very thick stuff, I wonder if that has something to do with it

JL

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×