mohadeeb 14 Report post Posted June 17, 2008 just wondering if anyone still use telescoping wands. or is everyone just dstreaming or xjetting. I have a 24 ft but it gives me a work out when i use it even with the belt. i havent used xjet before. would this work better? thanks Nam Dirty Jobs Unlimited, LLC - Home Share this post Link to post Share on other sites
0 MudDuck 20 Report post Posted June 17, 2008 X jet works great...get the M5 for more flexability. A tad shorter range but still works great. 35ft ish...Keep in mind it's a chem injector so the chems do the work, not a paint peeling blaster. Share this post Link to post Share on other sites
0 John Orr 206 Report post Posted June 17, 2008 I actually had to pull out my 48' Coress this past weekend. A roof I cleaned about 6 weeks ago had a lot of lichen. Not enough rain since the cleaning and a wedding next week meant manual removal. 2 story, 12/12 pitch and about 2 hours. Share this post Link to post Share on other sites
0 chris francis 15 Report post Posted June 17, 2008 I bet your back loved that workout you gave it. what pressure did you use and what kind roof was it. Share this post Link to post Share on other sites
0 Gutter Squad 14 Report post Posted June 17, 2008 I use my telescoping pole for gutter cleaning. After scooping the big stuff out, I run it up the gutter really quick to get the small debris out & then "jet" the downspout to get out hard clogs. Using this method, we can do about 400 linear feet of gutter per hour no problem. Share this post Link to post Share on other sites
0 Doug Dahlke 114 Report post Posted June 17, 2008 I have a 24' extension wand that I bought for one of the first jobs I did. Discovered the x-jet not long after that and have not used the wand since. Share this post Link to post Share on other sites
0 douseahouse 21 Report post Posted June 17, 2008 the main use of my telescopic wand is when i have to clean the outside of a chimney and need to get a little pressure close to the brickwork. i have cleaned some brick buildings in the past and it has also come in handy for that application. rando Share this post Link to post Share on other sites
0 Mountain View 14 Report post Posted June 17, 2008 I use mine for rinsing only. Mostly for second floor exteriors on house washes. I've downstreamed for a long time, never done the x-jet. Share this post Link to post Share on other sites
0 CWheeler 14 Report post Posted June 17, 2008 I have X-jetted in the past with good results. I downstream now and love it. I have a pole that i used to use until discovery of x-jet and downstreaming a few years ago. I keep the pole though it is always nice to have in the arsenal for the most difficult of jobs. Share this post Link to post Share on other sites
0 mohadeeb 14 Report post Posted June 17, 2008 I was thinking of rigging the pole on top of a sturdy tripod to see it this makes it easier for my back and shoulders. Hell im a small guy 5' 4" 140 so i need the help after holding onto this thing for a while. lol. will look at trying the other methods too. thanks for the info peeps. Share this post Link to post Share on other sites
0 Bryan C 14 Report post Posted June 18, 2008 Have a brand new one, never used it since the day I bought it 4 years ago. If anyone needs one, let me know... Share this post Link to post Share on other sites
0 deach 14 Report post Posted June 18, 2008 Have a brand new one, never used it since the day I bought it 4 years ago. If anyone needs one, let me know... Sold mine a while back. Never looked back. Share this post Link to post Share on other sites
0 staudend 14 Report post Posted June 18, 2008 I use mine only on 3 to 4 story houses and in windy conditions where the x-jet M 5 won't reach. I simply put a longer hose on the xjet and attach it to the extension wand. I don't know how I would do it otherwise unless ladder work was involved. Share this post Link to post Share on other sites
0 MichiganPowerWashing.com 14 Report post Posted June 18, 2008 I clean up to 3 story high buildings with great results and less chemicals than xjeting. I have absolutely no problem to do that with 24 feet wand. I'm 6.4 and about 270 lbs :) . Customers are always happy with the results. I will never use xjet again. I found out that after xjeting siding looks good BUT if you can see it close - especially 2 , 3 story high - it's still dirty ! With wand you can do much better quality job in almost same time I guess small guys will use xjet and real man / big guys will use wand :lgsideway Share this post Link to post Share on other sites
0 plainpainter 217 Report post Posted June 18, 2008 I bought one recently only for pre-paint prep, where you want to use pressure to knock off as much loose paint as possible - and I thought it might allow me to do this with less ladder work. As well - when customers want their gutters cleaned out and go with the cheaper option of just pressure washing all the crap out {they clean up the mess} Then I want to use it for that purpose so I don't have to get on a ladder for that as well. Share this post Link to post Share on other sites
0 allesnick 14 Report post Posted June 18, 2008 I also use mine for gutter cleaning only with the gutter hook. Share this post Link to post Share on other sites
0 paul barkley 14 Report post Posted June 18, 2008 I am interested in the Extension wand that you have, please let me know how much and what brand, etc..., look forward to hearing from you. Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted June 18, 2008 I still have one but it rarely sees any action. I love my XJet!!!! Share this post Link to post Share on other sites
0 deach 14 Report post Posted June 19, 2008 I guess small guys will use xjet and real man / big guys will use wand Real men climb ladders when needed :lgsideway:lgsideway:lgsideway No wait....my daughter climbs too when needed so not limited to men I guess :rotfl::rotfl: Share this post Link to post Share on other sites
0 MichiganPowerWashing.com 14 Report post Posted June 19, 2008 :lgangel: Share this post Link to post Share on other sites
0 ShineBrite LLC 14 Report post Posted June 19, 2008 Hey Michigan - I'm 5'10" AND 165LBS. AND my 24' aluminum extension extended out past 14' or so absolutely kills me - so you're right. That's why I always try to keep a big dumb guy employed!!!!!!!!!!!!! HA But seriously - both tools have their place. I'd recommend having both an extension wand and X-jet. A lance extension also helps on the X-jet sometimes. Share this post Link to post Share on other sites
0 John Orr 206 Report post Posted June 19, 2008 I bet your back loved that workout you gave it. what pressure did you use and what kind roof was it. Back, arms ... lol Less than 500 psi on asphalt shingles. Share this post Link to post Share on other sites
0 jnoden 15 Report post Posted June 19, 2008 I would use my 24 ft coress wand any day over ladder work. It is much faster and safer once you get the hang of it. Share this post Link to post Share on other sites
0 centexpw 16 Report post Posted June 19, 2008 Ladder - no, Extension Wand - yes, Ladder with extension wand - ??? Share this post Link to post Share on other sites
0 A and J POWERWASHING 64 Report post Posted June 23, 2008 got three for sale anybody one them Share this post Link to post Share on other sites
0 Rick2 42 Report post Posted June 26, 2008 The day after using my X-Jet for the frist time I came home and used a chainsaw on my telescoping wand so it would fit in the trash can. That's no joke. I only x-jet and ds now. Share this post Link to post Share on other sites
just wondering if anyone still use telescoping wands. or is everyone just dstreaming or xjetting. I have a 24 ft but it gives me a work out when i use it even with the belt. i havent used xjet before. would this work better?
thanks
Nam
Dirty Jobs Unlimited, LLC - Home
Share this post
Link to post
Share on other sites