rj242 16 Report post Posted April 3, 2009 How many of you use a high pressure filter? And should I be using one everytime I use my surface cleaner or turbo nozzle? Share this post Link to post Share on other sites
0 Paul Kassander 26 Report post Posted April 3, 2009 They are helpful with the smaller size nozzle on the surface cleaner to prevent any clogging and help to prevent wear on the turbo nozzles should you have any small debris that makes it through your inlet filters. Share this post Link to post Share on other sites
0 troikarestoration 14 Report post Posted April 3, 2009 We use them on all turbo nozzles. It has saved $ when a nozzle is $100+ it's a good investment. You need to make sure there's a good filter sytem on your water inlet as well, this is a pump saver. Just a screen is not enough. Share this post Link to post Share on other sites
0 Joe Ortiz 14 Report post Posted April 4, 2009 I have two screen filters before the pump and have never had any problems.but one time my helper put the SC down gun first and got dirt in there and cloggen a tip. it was a PITA to remove,then clean and reset. so it might help but i wont use them IMOya dont needem Share this post Link to post Share on other sites
0 One Tough Pressure 580 Report post Posted April 5, 2009 I do not use them on any of the surface cleaners, but do have one on the turbo that never gets used. Share this post Link to post Share on other sites
How many of you use a high pressure filter? And should I be using one everytime I use my surface cleaner or turbo nozzle?
Share this post
Link to post
Share on other sites